Wastewater Management Pumps and Valves Solutions

  1. Equipment Controller EC 531 10/9/2018

    The EC 531 is an all-in-one solution for control and monitoring of sewage pumping stations with one or two pumps. It offers straightforward control and monitoring via floats or advanced control via a continuous level signal. EC 531 is also equipped with smart VFD control including PID and Best Efficiency Point (BEP), which save energy, and equipment costs.

  2. Dynajet™ Dry Polymer Blending System 7/17/2018

    Compact, high performance dry chemical blending system utilizes blower-assisted conveyance system to transport and disperse the dry polymer prior to wetting. The wetting technology reduces plugging. The equipment is built from stainless steel to withstand extreme conditions and harsh environments.

  3. Dynablend™ Liquid Polymer Blending Systems 7/17/2018

    Dynablend™ liquid polymer blending systems are proven to be the most effective and reliable hydraulic polymer activation technology. The L4 and L6 are the smallest Dynablend units and the use of a peristaltic pump makes them the most economical of the Dynablend™ blending system. Patented Hydroaction technology follows the science of polymer activation. Two-stage mixing with the highest energy applied first at the moment of initial wetting (MIOW) followed by a "quiescent" zone allowing for more gentle activation as polymer science dictates.

  4. 4-12 Inch Insta-Valve 250 Insertion Valve 9/1/2017

    Installed under pressure, up to 250 psi, the Insta-Valve 250 increases operator safety, limits environmental impact, and saves up to 100% of the costs related to system shutdown.

  5. HSF 250 Series Line Stop Fitting 9/1/2017

    The re-designed 4-12 inch Hydra-Stop HSF 250 Line Stop fitting is a step forward in line stopping technology. Installed at pressures up to 250 psi, the HSF 250 line stop fitting delivers benefits, which save time, increase safety, and eliminates up to 100% of the costs associated with system shutdowns.

  6. 14”–16” Insta-Valve Plus 250 Insertion Valve 9/1/2017

    The 14”– 16” Insta-Valve Plus 250 from Hydra-Stop is the next generation of permanent, insertable gate valves offering increased strength, improved performance, and simplified installation and operation.

  7. STAR ONE™ S&L Non-Clog Pump 4/5/2017

    The new S&L STAR ONE™ Non-Clog Pump raises the bar on pump efficiency —anywhere from 3-5 percent higher than previous S&L pumps — paving the way for significant energy cost savings.

  8. EA25-250 Electric Actuators 10/27/2016

    The Electric Actuators Type EA25, EA45, EA120 and EA250 offer several beneficial features and covers a wide torque range.  With the variety of available options, this family of actuators is ideal for nearly all applications.

  9. 4632 Chlorine Dioxide Analyzer System 10/27/2016

    The Signet 4632 Chlorine Dioxide Analyzer System is an integrated all-in-one system designed to measure Chlorine dioxide residual up to 2 ppm/mg/l.

  10. ecoFIT Metric Industrial HDPE 10/27/2016

    ecoFIT PE100 Industrial Polyethylene ushers in a new generation piping system designed specifically for broad-based applications. The dynamic combination of specifiable pipe, fittings, valves, and advanced fusion technologies integrates well into the industrial process industry.