Wastewater Aeration Videos

  1. GDT For Rapid Ozone Mass Transfer & Degassing
    10/27/2017

    Mazzei’s GDT process delivers rapid and efficient ozone mass transfer under pressurized contacting conditions resulting in greater gas solubility.  Additional mixing and rapid gas bubble removal is provided by the system’s degas separator.  With high operational flexibility and low capital, installation and operating costs ― and all within a compact footprint ― the GDT mixing and contacting system is the best solution.

  2. Basin Nozzle Manifold For Wastewater Aeration
    10/20/2017

    Mazzei’s wastewater basin aeration system thoroughly agitates bulk water and mixes ambient air or pure O2 into the wastewater.  Utilizing in-house CFD modeling, Mazzei systems are designed to ensure efficient mixing and aeration. Unlike blowers, Mazzei aeration is virtually silent, and requires little to no maintenance.

  3. Lagoon Wastewater Aeration
    10/19/2017

    Mazzei’s lagoon aeration system is an efficient, low cost, quiet solution for wastewater problems. Optimally designed subsurface nozzles provide better mixing and agitating of wastewater than surface aerators.  Treatment efficiency increases as lagoon depth increases―no matter how deep―and the  system is easy to install and provides trouble-free operation. 

  4. Big Air: Aerzen Introduces Turbo Blower For Large Treatment Plants
    10/18/2017

    Aerzen USA has long preached — and excelled in delivering — "right-sized" blower solutions, offering energy efficiency by producing the proper amount of air for the application. Until recently, however, the company did not have an option for the largest of wastewater treatment plants. That has changed with the introduction of the Multicore series turbo blower, which is described in the following video by Tom McCurdy, National Sales Manager for Aerzen's Environmental Group.

  5. Sidestream Injection With PFR For Rapid Mass Transfer
    10/18/2017

    Mazzei’s sidestream injection system with Pipeline Flash Reactor (PFR) uniformly distributes gas into a bulk water flow minimizing the size and cost of gas contacting.  Gas is drawn in and aggressively mixed with a sidestream flow via a venturi injector. The sidestream solution is then returned to the main flow through the optimally designed nozzles of a PFR to ensure complete and uniform contacting and rapid mass transfer ―all within a compact footprint. 

  6. NURO Controller For ICEAS Advanced SBR Processes
    9/28/2017

    These days, operators are required to do more with less due to stricter nitrogen and phosphorus permits, pressure to reduce energy and chemical usage, and limited time and staff. How could these challenges be met without a plant reconfiguration?

  7. Kaeser's Line of Rotary Screw Blower Packages (Video)
    8/23/2017

    Kaeser screw blowers use up to 35 percent less energy than conventional rotary blowers and even achieve significant energy savings compared to currently available screw blowers.

  8. RWL Water & Emefcy Announce Merger To Form Fluence Corporation, Ltd.
    7/17/2017

    Founded in 2017, under the consolidation of global water industry leaders Emefcy and RWL Water, Fluence was established with a vision to become the key global provider in decentralized water and wastewater solutions.

  9. Wet Well Wizard In Action
    11/30/2016

    This video clearly illustrates how successful the wet well wizard is at eliminating FOG (Fats, Oils, and Grease) from collection system lift station wet wells. The patent pending Wizard design is guaranteed never to allow air bubbles to cavitate wet well pumps, to eliminate H2S odor from forming in the well where it is located, and eliminate all negative odors.

  10. Increasing Oxygen Transfer Efficiency In Wastewater Aeration
    10/29/2016

    Rich Gannon, Diffused Aeration Product Manager with Evoqua, explains the unique diamond punch pattern on the new Diamond S Plus membrane leading to more bubbles per square foot without increasing air flow rates to yield greater oxygen transfer efficiency.