Industrial Water and Wastewater Products

  1. Injection Skids 5/19/2017

    Mazzei injection systems are designed using Mazzei’s patented technologies to obtain the most efficient mixing and contacting of air, oxygen, ozone or chemicals into a water stream.

  2. Sanitaire ICEAS® Advanced SBR Technology by Xylem 9/9/2009

    Sanitaire has provided the wastewater treatment industry with innovative and cost-effective treatment technologies for over 35 years. This tradition continues with the Sanitaire Intermittent Cycle Extended Aeration (ICEAS) process, which is an advance sequencing batch reactor (SBR) technology for municipal and industrial wastewater treatment.

  3. 4632 Chlorine Dioxide Analyzer System 10/27/2016

    The Signet 4632 Chlorine Dioxide Analyzer System is an integrated all-in-one system designed to measure Chlorine dioxide residual up to 2 ppm/mg/l.

  4. Double Wall Storage Tank, 18,000 gal 3/24/2021

    Contain liquids and vapors in this double-wall chemical storage tank. All four walls and the V-bottom of this tank are double-skinned. The open area between the walls (interstitial area) will contain leakage from the primary (inner) wall should that occur, preventing liquid from leaking into the environment. There are interstitial drains to check for leaks.

  5. Amacan P - Submersible Motor Pump With Axial Propeller 9/5/2016

    Wet-installed, submersible motor pump with axial propeller in ECB design for installation in discharge tubes, single-stage, single-entry, explosion protection to ATEX II G2 T3.

  6. Double-See Double Containment 10/27/2016

    This vinyl double containment piping system is fast and easy to install, and is available with a complete selection of pipe, fittings, and valves. Additionally, an innovative "valve-in-valve" design is offered which allows full containment pressure rating. Double-See™ is available in PVC and CPVC; either material may be primary or secondary (PVC x PVC, CPVC x PVC, CPVC x CPVC) with Clear PVC always being an option for the containment pipe. System size options range from 1/2" x 2" to 6" x 10", meeting virtually any application requirement. Installation versatility allows simultaneous joining throughout a system or in combination with patented closure couplings which enable practical compliance with the ASME B31.3  requirement for visual inspection of all primary joint connections during the pressure test before closing the secondary piping joint.

  7. PulsaTron X 6/25/2024

    When safety, compliance, and reliability matter the Pulsatron X Explosion Proof metering pump provides safe feed of chemical into your process. The hazardous location ratings of Pulsatron X indicate its exceptional durability to manage internal explosions, enabling dependable and accurate chemical metering in a secure and reliable manner.

  8. Aquametrix 2250 Multi-Parameter Controller 7/20/2016

    Designed to be the most flex­ible, easy to use, and easy to see multi-parameter controller on the market, the 2250 and 2250 TX excels in measuring Conductivity, pH, ORP or Flow.

  9. Produced Water Filtration – Spectrum™ Plus Filtration 5/14/2012

    Spectrum™ Plus Filtration is a nutshell filter that has the unique ability to remove oil and suspended solids to much lower levels than can be achieved by conventional nutshell media filters.

  10. Thermo Scientific AquaSensors DataStick pH Measurement System 1/13/2009
    Connect this pH sensor directly to a PLC (Programmable Logic Controller) for seamless integration with industrial control systems. Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box.