WASTEWATER Flow Control Resources
-
In-Situ Calibration: Methods And Pitfalls Of Thermal Mass Flow Meter Sensor Field Validation
5/1/2016
Mid-to-large size facilities and campuses inevitably have hundreds of flow instruments to monitor, maintain, and repair. For a reliability engineer, ensuring that all instrumentation meets ISO 9000 or similar standards is a time-consuming responsibility. By Matthew J. Olin, President & CEO, Sierra Instruments, Inc.
-
Precise Biogas Flow Measurement
4/25/2016
As oil prices remain high, we are in the midst of a nation-wide initiative to seek renewable sources of energy to increase energy efficiency and energy security. Renewable energy accounted for 13.2% of the domestically produced electricity in 2012. Among the sources of renewable energy is the production of biogas from landfill gas (LFG) or digester gas. By Scott Rouse, VP Product Management, Sierra Instruments
-
Is Water 4.0 The Future?
4/21/2016
Water 4.0 is a concept that has recently been raised as the “future” of the water industry …possibly. Apart from being a paraphrase of Industry 4.0, the questions have to be asked: What is it, and what does it have to do with the way the water industry operates in its current state?
-
Best Practices For Flow Meter Calibration
4/18/2016
Get to know the basics, best practices, and importance of flow meter calibration from an industry expert.
-
Flow Meter Ensures A Smooth Running Recovery Process At Bakery Production Plant
2/24/2016
Employing roughly 5,000 workers in 12 countries, Vandemoortele bakery and production plant owes its success to high standards of quality, innovative production technologies, and a flair for finding economic alternatives. The latest example is the SITRANS FC430 Coriolis flow meter.
-
Local Support Saves Time And Money
2/1/2016
At a water treatment plant that provides drinking water for distribution to a large area of customers, a contractor decided to switch to SITRANS FM MAG 5100W flowmeters. A local representative saved a the contractor time and money by recognizing the need for the magmeter to be isolated from the piping protection before startup, which also saved the customer from added downtime.
-
Math Solutions: Poundage Calculations For Waste Stream, Tank Volume, And Percent (%) Solution
1/6/2016
Water Online’s “Math Solutions,” presented by wastewater consultant and trainer Dan Theobald (“Wastewater Dan”), instructs operators on poundage calculations.
-
Food Processor Monitors Water Usage And Verifies Meter Calibration
11/22/2015
A food processing company in northern California has a small wastewater treatment plant to treat its wastewater before releasing it back to the local municipality.
-
West Virginia City Says It All Adds Up With The FPI Mag Flow Meter
10/29/2015
The city staff of Buckhannon, West Virginia, recently ran into a situation that didn’t add up. A flow meter at one of the city’s booster stations was indicating a flow rate higher than the capacity of the station’s pumps. The staff contacted the applications team at McCrometer about its flow meter accuracy problem.
-
Wastewater Plant Solves Combined Sewer And Flow Metering Problems
8/4/2015
The Easterly Wastewater Treatment Plant recently found ways to solve two knotty problems at essentially the same time. Because of the number of combined sewers in Easterly’s service area, the plant needed to add capacity and overflow storage, and management decided to also address a need that was going to grow in importance in the near future — flow metering. By Jack Sine, FLEXIM Americas Corp.