Drinking Water Measurement White Papers and Case Studies

  1. Need Water Quality Assurance? UV254 Can Help
    5/21/2009
    Superior water quality, it is why we treat our waters. All around the world we are continually striving to improve the safety of our drinking water to protect public health. However, how are we assuring the success of our efforts? UV254 testing provides valuable assurance about your water quality by detecting organic matter in water. This is something that turbidity can’t do. Just because you have low turbidity does not mean that you will have low organics. By Real Tech Inc.
  2. 12 Steps To Precise pH Measurement
    4/18/2013

    You want good pH data.  Who doesn’t?  You deserve good data, but for good pH data you need to calibrate.  You need to calibrate well and calibrate often. By Lyndsey McDermand

  3. The Energy Footprint Of Drinking Water
    10/26/2017

    Drinking water and wastewater systems are generally the largest energy consumers for municipal governments. However, there is little published information available on the exact energy usage for specific systems.

  4. Flow Meter Advisory: Follow The Money
    5/26/2017

    While the majority of household consumers believe that they deserve the full attention of a water system, from a revenue perspective this does not bear out. Though the average home faucet is undoubtedly valued by its drinking water provider, the reality is that the vast majority of drinking water revenue comes from heavy-use commercial and industrial operations.

  5. How To Install pH Sensors
    3/25/2015

    This article is for those of you who need to install a new or redo an existing pH loop. These tips can help ensure accurate and consistent readings.

  6. A Visual Guide To Troubleshooting Your Valves
    1/9/2017

    Water management professionals know all too well that problems arise — usually sometime after 2 a.m., or just as you’re walking out the door for a holiday weekend. No matter how well-prepared you are, or how sophisticated your system, sometimes you’re going to run into challenges. It’s simply the nature of the industry. When you experience an issue with your valves (especially when they’re failing to open or close as expected) your first instinct is to call the factory for support. While some cases may require factory assistance, this isn’t always the most efficient solution.

  7. The Next Generation In Water Filtration For The Oil And Gas Industry
    4/17/2013

    There is a need in many segments of the oil and gas production industry for an improvement in water filtration over traditional methods. By Michael Dejak, P.Eng. 

  8. Lightning Fast Response Prevents Extended Down Time
    7/29/2015

    The City of Gordon Texas’s drinking water facility was struck by lightning. Thinking long term, and desiring the latest technology available, the City took this opportunity to upgrade their on-line instrumentation with a range of new continuous monitoring on-line instruments including chlorine analyzers, pH monitoring, temperature monitoring, and turbidity monitoring.

  9. Flow Data Red Flags: When To Act
    12/20/2017

    Accurate flow measurement is critical to most water and wastewater processes. Red flags may pop up to indicate meter problems, but which ones should lead you to act — and when? The answer depends on the type of meter, what it is used for, and whether the readings are local or remote.

  10. A Helpful Guide To The Benefits Of The Single Rolling Diaphragm
    1/5/2017

    Reducing water loss and saving money are two of the highest priorities—and most consistent challenges—facing water professionals. Both of these issues stem from water pressure control.