Drinking Water Measurement Solutions

  1. Phosphax sc Phosphate Analyzer 5/14/2024

    The PHOSPHAX sc Phosphate Analyzer is environmentally controlled for rugged, outdoor installations, provides a wide measurement range for a variety of wastewater and drinking water applications (e.g. in the activated sludge basin, for phosphate elimination and my more), and comes with the fully featured "Plug & Play" digital controller. 

  2. PGC5000 Gas Chromatograph Oven With Integrated Controller 8/6/2018

    Shelter space and the overall initial investment in analytical equipment can be expensive. The PGC5000 oven with an integrated controller offers a low initial investment solution by integrating the single board computer (SBC) directly into the PGC5000B or PGC5000C gas chromatograph ovens.

  3. LC-MS Analysis Of PFAS Compounds In EPA 533 After Supelclean™ ENVI-WAX SPE Cleanup 8/29/2022

    This application note demonstrates the extraction and subsequent analysis of 25 related analytes from water using Supelco SPE cartridges.

  4. Automatic Rinse Tank Controls 10/29/2021

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored.

  5. DPI610E High Accuracy Handheld Pressure Calibrator 11/29/2021

    The DPI610E is a portable high-accuracy handheld pressure calibrator ideal for engine testing. With 0.025% FS accuracy and a total 1-year uncertainty, it provides stable pressure calibration from vacuum up to 1000 bar. The device is perfect for on-vehicle testing, ensuring accurate calibration and performance monitoring.

  6. Advances In Paper-Based Devices For Water Quality Analysis 2/22/2017

    Water quality test strips have been around for decades. They are usually constructed from a porous media, including different types of paper, and undergo a color change when dipped into water containing the analyte of interest. These test strips have seen application in swimming pools, aquariums, hot tubs, remediation sites, and other commercial/environmental areas.

  7. Fusion Total Organic Carbon (TOC) Analyzer 10/16/2014

    The Fusion Total Organic Carbon (TOC) Analyzer utilizes UV Persulfate oxidation allowing superior carbon liberation from even the most challenging matrixes. Low-end sensitivity is achieved from a Non-Dispersive Infrared (NDIR) detector. The Fusion Total Organic Carbon (TOC) UV Persulfate Analyzer offers more flexibility, intelligence and user friendliness making this analyzer ideally suited for the most demanding laboratory needs.

  8. Real-Time Conductivity Monitoring Estimates Chloride Levels In Minnesota Watershed By Using The Aqua TROLL 200 11/18/2011
    Monitoring deicing chemical levels can help researchers, city governments, and regulatory agencies understand runoff impacts on surface water, groundwater, and surrounding environments.
  9. ABB Ability™ For Pumping Stations 8/2/2018

    Real-time control of a 360km water distribution system through an advanced distributed control system.

  10. OPTIMASS 2400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis meter features Entrained Gas Management (EGMTM) for liquid applications, maintaining operation over a wide range of gas fractions and complex flow conditions. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase flow.