Drinking Water Measurement Solutions

  1. Pro1020 Dissolved Oxygen and pH or ORP Meter 1/1/2014

    Rugged and reliable, the YSI Pro1020 provides everything you need in a handheld instrument for the measurement of either pH or ORP along with temperature, and dissolved oxygen.

  2. Advances In Paper-Based Devices For Water Quality Analysis 2/22/2017

    Water quality test strips have been around for decades. They are usually constructed from a porous media, including different types of paper, and undergo a color change when dipped into water containing the analyte of interest. These test strips have seen application in swimming pools, aquariums, hot tubs, remediation sites, and other commercial/environmental areas.

  3. STE Sensor Termination Enclosure 11/29/2021

    This sealed “junction box” receives the special “vented” type sensor cable from a Druck sensor and connects to a less expensive, non-vented, proprietary sourced instrument cable. It allows barometric reference pressure to enter the enclosure while providing a block to water/humidity entering and condensing in the assembly.

  4. OPTIMASS 2400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis meter features Entrained Gas Management (EGMTM) for liquid applications, maintaining operation over a wide range of gas fractions and complex flow conditions. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase flow.

  5. AFC SEMPER™ Remote Pressure Monitor (RPM) With Impulse Technology 2/18/2020

    The AFC SEMPER® RPM featuring "Lift & Shift" capability is an ideal solution for pressure monitoring, transient analysis, fire flow testing, customer pressure concerns, and hydraulic model calibration. This flexible installation method allows the use of a smaller number of units to cover a large area with the advantage allowing utilities to move their RTU’s quickly and easily without having to reconfigure the application or retrofit existing assets. 

  6. Water Quality Monitoring: Clarity II™ Turbidimeter 8/30/2005

    The Clarity II turbidimeter is intended for the determination of turbidity in water. Low NTU measurement capability, efficient bubble rejection, and easy calibration make Clarity II ideal for monitoring the turbidity of filtered drinking water

  7. Application Note: Low-Flow Sampling Of Water Quality Parameters Used In Determining Groundwater Stability 1/20/2010
    In April 1996, the U.S. EPA developed and published a document entitled Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures. The document states that “the most common ground water purging and sampling methodology is to purge wells using bailers or high speed pumps to remove 3 to 5 casing volumes followed by sample collection.” Adverse impacts can occur through this method affecting sample quality by increasing levels of turbidity. These problems can often be mitigated by using low-flow purging and sampling to reduce sampling-induced turbidity. By YSI
  8. Network Monitors Water Quality In Shale Gas Drilling Region 9/2/2011
    High-pressure injection of water, sand, and chemicals that fracture shale deposits deep underground to free trapped natural gas is employed by drillers tapping the Marcellus shale beds, a geologic deposit that stretches from central New York to Virginia and contains gas believed to be worth hundreds of billions of dollars. By YSI
  9. Table-Top Bacteria Detector: Bacometer 9/12/2024

    Analyzing bacteria concentrations without any pre-processing.

  10. Module Turbidity Meter: WP-4000 9/12/2024

    Turbidimeter worth thousands of dollars turned into a $1,000 smart home appliance.