Drinking Water Measurement Solutions

  1. Aztec 600 Phosphate Analyzer 6/18/2010

    The Aztec 600 Phosphate Analyzer AW636 has been designed specifically for the measurement of phosphate in both potable water and municipal wastewater effluents. It offers reliable and accurate on-line analysis of phosphate up to 50 ppm PO4.

  2. Reduce Or Eliminate Water Hammer With Valve Positioners 5/19/2022

    Water hammer, which can occur in just about any pumping system and even steam systems, can lead to pipe breakage, equipment damage or even total system failure. Addressing water hammer at the source is the savviest and most cost-effective way to handle the issue.

  3. Pulsar™ R96 Radar 1/2/2014

    The Pulsar™ Model R96 Non-Contact Radar transmitter for accurate, reliable level control in process applications. Virtually unaffected by the presence of vapors or air movement within a vessel’s free space, the two-wire, loop-powered, 6 GHz Radar transmitter measures a wide variety of liquid media in process conditions ranging from calm product surfaces and water-based media to turbulent surfaces and aggressive hydrocarbon media.

  4. UltrapenX2™ PTBT2 Bluetooth® Enabled pH And Temperature Pen 6/10/2022

    The PTBT2 is a lab-accurate water quality pocket tester that allows you to use your mobile device and the X2 app to measure, store and export data.

  5. Enclosed Industrial Clean Power VFDs – Controlling Water Everywhere It Goes 4/26/2017

    Moving water and controlling water systems is no easy task. There are many variables involved with fluid dynamics, the addition of environmental, harmonics and energy cost concerns make system control even more difficult. Eaton understands these problems and provides enclosed drives solutions for water/wastewater. From NEMA 4X enclosures to our Active Energy Control algorithm and five-year warranty, Eaton provides a complete solution for water/wastewater applications.

  6. WATERFLUX 3300 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX ,3300 is an electromagnetic flowmeter (EMF) for demanding water applications and custody transfer operations (MID MI-001, OIML R49; MI-004). The high-end meter is particularly suitable for applications requiring high accuracy and extensive diagnostics. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX ,3300 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.

  7. VOC Headspace 10/29/2014

    Static headspace is one of the most popular techniques due to its versatility for analyzing volatile organic compounds (VOCs) in a complex variety of matrices. This is due to the elimination of tedious sample preparation steps and prevents contamination problems that are common to other sample introduction techniques. Teledyne Tekmar draws on our experience as a leader in low-level VOC analysis with the introduction of this companion autosampler to the Headspace product line.

  8. Capital Controls® Series 600 Gas Chlorinator 10/15/2015

    De Nora Water Technologies developed the direct gas-pressure chlorinator for applications where electricity, used to operate a booster pump, and water pressure, required for ejector vacuum operation, are unavailable.

  9. Radar Level Transmitters 5/9/2017

    Radar Level Transmitter Types 2290 and 2291 incorporate advanced radar sensing technology designed for high accuracy tank level measurement in a wide range of chemical processing and water treatment applications. The addition of radar technology to the company’s existing ultrasonic and hydrostatic sensors now provides three different level measurement technologies to meet virtually any level requirement.

  10. Calibration Adaptors 11/29/2021

    A regular calibration check is essential to meet local or national quality practice. This requires a level sensor to have a known pressure applied and the output measured.