Drinking Water Measurement Solutions

  1. Capital Controls® Series 1041A Automatic Switchover 10/22/2015

    The Automatic Switchover system Series 1041 provides safe, reliable switching between two gas (pressure or vacuum) or two liquid (pressure or level) sources assuring an uninterrupted supply of chemical to the application. Automation of all functions (switchover, system initialization, configuration, lamp test, and safety functions) is done with an internal programmable logic controller for operational flexibility, enhanced reliability, and ease of use. If needed, local manual override is conveniently available for operator control to maintain continuous operation.

  2. Coriolis Mass Flowmeter: CoriolisMaster FCB430 And FCB450 11/12/2015

    CoriolisMaster FCB400 series of compact Coriolis mass flowmeters feature low pressure drop, high capacity, intuitive ABB common display, five modular I/O's and HART communication.

  3. Aqua TROLL 100 And 200 Instruments 11/18/2011
    Conductivity measurements can be used to characterize water quality changes relative to a baseline or to estimate the concentration of contaminants.
  4. ULTRAPEN™ PT™ And PTBT™ Series Pocket Testers 3/9/2022

    Get benchtop lab accuracy in an easy-to-use, easy-to-maintain, wireless, handheld instrument designed for diverse, demanding, water quality testing applications. Select from a variety of pocket testers, each featuring simultaneous measurement of Temperature and one critical parameter:

  5. Protecting Pumps From Dead Head Conditions 4/6/2017

    The C445 motor management relay offers the most configurable protection options in the industry, with features specifically designed to protect critical pumps from costly damages due to dead-head and other underloaded or starved pump conditions.

  6. AQUATek 100 Waters-Only Autosampler 10/15/2014

    The AQUATek 100 is a purge and trap autosampler that automates the sample preparation steps for the analysis of liquid samples utilizing a fixed volume sample loop filled using a pressurization gas. Two independent volume programmable internal standards are then added to the sample and the entire aliquot is transferred to the Purge and Trap for compound concentration and subsequent separation and detection using a GC/GC-MS quantification system.

  7. NP6000sc Phosphate Analyzer 3/30/2026

    The Hach® NP6000sc Phosphate Analyzer offers dependable and accurate measurement to meet regulatory requirements, maintain process control, and reduce operational costs. Designed for wastewater facilities, the NP6000sc features straightforward installation, simple maintenance, and optimized cleaning cycles that help you save time while maximizing uptime.

  8. Capital Controls® Gas Feeder Series WM4000 10/12/2015

    Capital Controls Series WM4000 gas feeders are wall cabinet mounted vacuum operated and designed to conveniently house a combination of gas feed equipment. The fibreglass cabinets enclose the gas flow control components.

  9. TOC Analysis: The Best Tool In A Drinking Water Facility's Toolbox 5/3/2019

    SUEZ Water Technologies & Solutions designs and manufactures Sievers Total Organic Carbon (TOC) Analyzers that enable near real-time reporting of organic carbon levels for treatment optimization, quality control & regulatory compliance. TOC has a wide range of applicability at a drinking water plant, and therefore any drinking water utility — large or small — can measure TOC in their laboratory or online in their treatment process.

  10. OPTIFLUX 2050 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 2050 is an electromagnetic flowmeter (EMF) for basic water and wastewater applications. It is suitable for all cost-effective measurements where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The EMF has a wide diameter range (DN25…1200 / 1…48") and all drinking water approvals. The extra isolation of the electronic device and housing makes this EMF particularly suitable for use in areas with extreme humidity.