Water and Wastewater Solutions For The Oil and Gas Industry

61. City Of St. Cloud Relies On Thermal Flow Meters For Digester Biofuel Co-Gen Power Process 8/13/2018

    The City of St. Cloud, Minnesota, straddles the Mississippi River near the center of the state a little more than 65 miles north of the twin cities of Minneapolis-St. Paul. The city’s forward thinking staff began looking for sustainable green energy solutions in 2003. After planning and initiating a series of projects over several years, the site is today producing renewable energy with a 20 kW rooftop solar array, a 220 kW solar array and biofuels electricity generation.

62. Injecting Agility And Automation At The Well Pad 9/12/2022

    Learn how adopting technology solutions that will make oil and gas companies agile and effective can allow these organizations to secure fast and significant ROI while meeting production and operations demand. 

63. The Big Fracking Question: Is Drinking Water At Risk? 12/5/2014

    Understanding the impacts of hydraulic fracturing (“fracking”) on source water, in both quantity and quality, is of vital importance to industry, the economy, and society. The latest research on the subject is presented, along with possible solutions to help overcome known and potential problems.

64. Pump Health Monitoring 1/20/2021

    In process industries such as oil and gas, pharmaceutical and chemical, it is essential to maintain and prolong the lifetime of critical assets including pumps, valves, heat exchangers and compressors.

65. Advanced Aeration In Hydraulic Fractured Water Impoundments 4/6/2015

    With so much attention paid to the fate of frack water — how it’s handled and cleaned — it’s time to consider the effectiveness of prevailing treatment methods.

66. Thermal Flow Meters Help Electric Power Plants Keep Their Cool With Hydrogen Gas 12/20/2021

    In all electric power generation plants (gas, solar, coal or nuclear), the fuel source of choice heats a large boiler, which creates steam that drives turbine blades to rotate. The turbine shaft in turn spins magnets inside the generator, which induces an electrical current in a coil of wires. It’s a high-temperature process both in terms of the boilers and steam, but also at the back end of the process where the electric current generates a large amount of heat that must be managed in order to keep the generator’s wire coils cool enough to avoid degradation or failure. Depending on the MVA size of the generator, hydrogen (H2), air or water is typically used to provide cooling.

67. Drought Forum Webinar: The Growing Demand For Re-Used And Brackish Water 5/7/2015

    The Western Governors' Drought Forum webinar “Once Marginal, Now Crucial: The Growing Demand for Re-used, Produced, and Brackish Water” explores the technological and regulatory obstacles to utilizing re-used, produced, and brackish water.

68. FEDI Solution For Sohar Refinery Project 1/1/2016

    Orpic (Oman Oil Refineries and Petroleum Industries Company) required a thermal seawater desalination solution as part of its Sohar refinery improvement project to ensure an uninterrupted supply of fresh feed water to for its boilers.

69. Fracking Disclosures Show Widespread Use Of Hazardous Chemicals 4/3/2023

    Fracking, short for hydraulic fracturing, is a process in which workers inject fluids underground under high pressure. The fluids fracture coal beds and shale rock, allowing the gas and oil trapped within the rock to rise to the surface. Advances in fracking launched a huge expansion of U.S. oil and gas production starting in the early 2000s but also triggered intense debate over its health and environmental impacts.

70. Well-Pad Automation Through The CC1310 Wireless MCU 9/14/2022

    To stay competitive against big players, smaller regional oil and gas companies are turning to well-pad automation practices to keep their costs low and their production reliable and steady.