Water and Wastewater Solutions For The Oil and Gas Industry

  1. Thermal Mass Flow Meter Helps Mud Logging Contractor Meet U.S. EPA Flare Gas Emissions Monitoring Requirements
    12/14/2017

    Upstream oil/gas production companies around the globe depend on mud logging service companies to analyze mud samples that help them maintain the correct direction for their drilling field operations. In mud logging, samples of rock cuttings from bore holes are brought to the surface by recirculating drilling media (mud) for analysis by a mobile laboratory to determine the lithology and fluid content of the sample.

  2. Breakthrough Technology Is Good For Fracking — And The Environment
    12/1/2014

    The Department of Energy (DOE) is funding a demonstration project that remediates acid mine drainage water, providing both source water and useful byproducts for hydraulic fracturing operations.

  3. Water Management For Fracking Evolves
    11/19/2014

    To date, the bulk of analysis on the U.S. fracking industry has largely centered on well counts and oil and gas production.

  4. Capacitance Level Switches Provide Reliable Water/Oil Interface Detection
    12/2/2013

    There are a number of point level approaches to measuring the interface between water and oil for water dump control in the oil and gas industry. However, each has disadvantages — manual methods introduce human error, conductivity switches are rendered inaccurate by buildup, and float switches are susceptible to wear and tear. This white paper introduces capacitance level switches as an accurate and reliable alternative for water/oil interface detection.

  5. Selecting An Envirnomentally Friendly Zero Liquid Discharge System
    7/17/2013

    Mississippi Power Company had a wide range of environmental considerations when they set out to choose a builder for a Zero Liquid Discharge (ZLD) system, integrated gasification combined cycle (IGCC) power plant. Aquatech was selected due to the company’s proven success in providing cost-effective, environmentally-focused water treatment solutions for the power industry. This case study provides details and technical specifications on the system selected.

  6. Is My Pump Operating At Its Optimum Rate?
    11/16/2017

    An optimized pump and slurry system can make or break a business in the Canadian Oil Sands. Costing up to $100,000 per hour due to lost production, it’s no secret that sites plagued by frequent shutdowns, pump malfunctions, or constant parts replacements struggle to control costs.

  7. 3M Liqui-Cel Membrane Contactors Remove Dissolved Gases From Water In Many Hydrocarbon Recovery And Process Applications
    11/26/2013

    The oil and gas industry has utilized various deaeration technologies for many years to remove dissolved gases, particularly oxygen, from injection water. Minimizing the environmental impact, improving operating efficiency, avoiding process issues and protecting system components are just a few of the reasons degassing is necessary in many hydrocarbon recovery and water processes.

  8. Greenhouse Gas Flow Monitoring
    12/27/2017

    Last year the EPA implemented new regulations entitled “Mandatory Reporting of Greenhouse Gases.” The new regulations called for certain facilities emitting 25,000 metric tons or more per year of specified GHG’s to provide an annual report of their actual GHG emissions. 

  9. Case Study: New MIOX iAO Technology For Groundwater Remediation At 75% Cost Reduction
    4/25/2014

    Cl₂/UV AOP treatment processes are highly complex and dependent on a number of water chemistry and treatment process parameters. With over three years of direct experience, MIOX is in a unique position to apply its expertise towards customer-specific optimization of Cl₂/UV AOP treatment processes with the goal of reducing costs and improving safety. The use of MIOX’s On-Site generation systems, which produces aqueous chlorine from non-hazardous sodium chloride brine, offers a safer and superior chemical introduction into AOP treatment trains compared to concentrated hydrogen peroxide or bulk hypochlorite.

  10. New Report Offers Long-Awaited Answers About Reusing Oil And Gas Industry’s Wastewater
    5/2/2017

    A new report from the Oklahoma Water Resources Board’s Produced Water Working Group indicates that oil and gas companies looking for ways to dispose of large volumes of wastewater should focus on recycling those liquids within the oil and gas fields, and not use it for irrigation or other surface applications where human and environmental exposure is a risk.