Wastewater Measurement Products

  1. SITRANS FS290 Portable Clamp-On Flow Meter Test Kit 1/13/2022

    Each measuring path is formed by two coordinated transducers that transmit ultrasonic signals back and forth through the pipe. Using the transmit and receive time difference between the two signals, caused by the flow in the pipe slowing the transit time against the flow and accelerating the time with the flow, the transmitter calculates the resulting flow measurement.

  2. DigitalFlow™ DF868 Liquid Ultrasonic Flowmeter 1/11/2022

    The DigitalFlow DF868 is a full-featured, fixed-installation liquid flowmeter designed to meet all your flow metering and energy measurement needs. Its patented Correlation Transit-Time™ digital signal processing provides drift-free measurements in ultraclean and most “dirty” liquids. This includes fluids with gas bubbles and entrained solids that have previously required Doppler-type meters.

  3. PanaFlow ZxG Gas Meter System 1/11/2022

    The PanaFlow gas meter system consists of two models— the one-path PanaFlow Z1G and the two-path PanaFlow Z2G. Both meters offer a high-performance, yet affordable solution for a variety of gas flow applications.

  4. DPI610E High Accuracy Handheld Pressure Calibrator 11/29/2021

    The DPI610E is a portable high-accuracy handheld pressure calibrator ideal for engine testing. With 0.025% FS accuracy and a total 1-year uncertainty, it provides stable pressure calibration from vacuum up to 1000 bar. The device is perfect for on-vehicle testing, ensuring accurate calibration and performance monitoring.

  5. DPI620 GENii And PV624: HighAccuracy Handheld Pressure Calibrator And Base Station 11/29/2021

    The DPI620 GENii is a high accuracy handheld pressure calibrator which is ideal for engine testing due to its 0.0185% FS accuracy. With fast acting pressure generation up to 20 bar within 30 seconds, on vehicle test and calibration can be performed with confidence.

  6. Calibration Adaptors 11/29/2021

    A regular calibration check is essential to meet local or national quality practice. This requires a level sensor to have a known pressure applied and the output measured.

  7. Sink Weights 11/29/2021

    Many submerged sensor applications require additional weight to prevent incorrect datum reference due to “cable snake.”

  8. Cable Clamp 11/29/2021

    In many surface and ground water applications there has been no easy or cost-effective way to hold a sensor cable at the water exit point, until now. This clamp secures a sensor cable and prevents the vent tube in the sensor cable from becoming constricted. The slide mechanism of the cable clamp makes installation an easy task.

  9. STE Sensor Termination Enclosure 11/29/2021

    This sealed “junction box” receives the special “vented” type sensor cable from a Druck sensor and connects to a less expensive, non-vented, proprietary sourced instrument cable. It allows barometric reference pressure to enter the enclosure while providing a block to water/humidity entering and condensing in the assembly.

  10. optimyze™: Condition Monitoring To Optimize Your Bottom Line 9/7/2021

    Using predictive analysis, optimyze identifies potential problems with your equipment before they occur, to help you manage system reliability and maintenance. Information is monitored, collected, stored and analyzed in the optimyze sensor. This allows you to understand the current health and historical trends of your assets, create maintenance reminders and generate detailed reports. As a result, you can perform preventative maintenance before issues become critical to uptime.