Wastewater Instrumentation Solutions

  1. Simplify And Optimize Your Process With Level And Pump Control 3/1/2022

    Level controllers have evolved to meet today’s environmental challenges and industry demands. Learn how they support improved process management and, ultimately, a better bottom line.

  2. Scrubber Application 1/27/2022

    This customer supplies district heating and electricity for the region of Sønderborg. For one of their waste applications a MAG meter failed within 6 months, and was successfully replaced with a Panametrics Aquatrans AT600.

  3. Optimizing Brine Flow In A Geothermal Power Plant 1/27/2022

    Different flow meter technologies were used in this geothermal power plant to monitor and measure brine. However, these traditional technologies failed. That’s where Panametrics PT900 Portable Ultrasonic Flowmeter was able to help.

  4. RentEZ 14" To 24" EZ Valve 1/26/2022

    The EZ Valve is an inline insertion valve that can be installed on water lines and depending on the pipe material, installation takes anywhere from 45 minutes for our smaller valves to 3 hours for our larger range.

  5. RentEZ 4" To 12" EZ Valve® 1/26/2022

    EZ Valve Kit 'rent-free' and indefinite. Lease remains in effect as long as the customer remains in compliance with its terms. Six valves to be purchased up front. After 60 days a further six valves must be purchased every six weeks.

  6. SITRANS FS290 Portable Clamp-On Flow Meter Test Kit 1/13/2022

    Each measuring path is formed by two coordinated transducers that transmit ultrasonic signals back and forth through the pipe. Using the transmit and receive time difference between the two signals, caused by the flow in the pipe slowing the transit time against the flow and accelerating the time with the flow, the transmitter calculates the resulting flow measurement.

  7. Best Practices In Moist And Wet Gas Flow 12/20/2021

    The Wet Gas MASSter sensor is for use in applications that have a high level of moisture or condensation present in the gas flow stream that cannot otherwise be removed.

  8. DPI610E High Accuracy Handheld Pressure Calibrator 11/29/2021

    The DPI610E is a portable high-accuracy handheld pressure calibrator ideal for engine testing. With 0.025% FS accuracy and a total 1-year uncertainty, it provides stable pressure calibration from vacuum up to 1000 bar. The device is perfect for on-vehicle testing, ensuring accurate calibration and performance monitoring.

  9. DPI620 GENii And PV624: HighAccuracy Handheld Pressure Calibrator And Base Station 11/29/2021

    The DPI620 GENii is a high accuracy handheld pressure calibrator which is ideal for engine testing due to its 0.0185% FS accuracy. With fast acting pressure generation up to 20 bar within 30 seconds, on vehicle test and calibration can be performed with confidence.

  10. Calibration Adaptors 11/29/2021

    A regular calibration check is essential to meet local or national quality practice. This requires a level sensor to have a known pressure applied and the output measured.