Wastewater Flow Control Measurement Solutions

31. ModMAG® M3000 Electromagnetic Flow Meters 7/21/2020

    The ModMAG^® M3000 electromagnetic flow meter is virtually unaffected by density, temperature, pressure and viscosity changes, making it an accurate and reliable long-term metering solution. This meter is approved for Class 1, Division 2 environments. 

32. ModMAG M2000 Electromagnetic Flow Meters 7/21/2020

    Combining a general-purpose detector with an amplifier, the ModMAG M2000 electromagnetic flow meter features an advanced, user-friendly design that is built for field verification testing with the use of a simple, handheld device. 

33. HydroRanger 200 12/10/2019

    The HydroRanger 200 gives you unparalleled ease of use, setup in under a minute, customer-driven features, and PROFIBUS DPV1- all to make your work simpler and to provide the reliability you have grown to trust in Siemens ultrasonic controllers.

34. QCT Series In-Line Ultrasonic Flow Meters for Low Viscosity Liquid Applications 11/29/2019

    The compact QCT Series has no moving parts and there is nothing in the flow stream that will cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

35. QLF Series In-Line Ultrasonic Flow Meters For Low Viscosity Low Flow Rate Applications 11/29/2019

    The QLF Series in line ultrasonic flow meter has been specifically designed for low flow rate applications that require excellent accuracy & reliability. The compact QLF Series has no moving parts, non-wetted sensors and no obstructions in the flow stream to cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

36. Magnetic Flow Meter Measures Water For Continuous Mix Concrete Plants 11/26/2019

    Massive construction projects require a continuous source of concrete to be poured as rapidly as possible. However, trucking in premix is not an option for such large projects. Concrete must be continuously mixed on-site and delivered via conveyor rapidly to the pour site. Accurate and reliable measurement of water is a must for these continuous mix concrete plants.

37. Magnetic Flow Meters Improve Recycling Of Gas Well-Produced Water 11/26/2019

    As old gas & oil fields play out, newer methods must be used to extract resources from areas where they are locked in layers of shale. One current technique is known as “fraccing,” in which high pressure water is pumped into the well shaft to “fracture” the rock layers, allowing more natural gas to escape and be collected. However, this technique poses a number of environmental problems, including contamination of water with hydrocarbons, solid particulates, and scale producing ions — making it unsuitable for reuse.

38. EL 1100 Series Wafer Mag Meter For OEM Applications 11/26/2019

    The EL1100 series of electromagnetic flow meters represent the state of the art for the accurate measurement for OEM process applications. This new generation flow meter utilizes an innovative structure to route the electromagnetic signal generated by the electrodes, providing a flow meter with an extremely wide measurement range. With no moving parts, the EL1100J provides a compact installation with wafer connections making it a solid choice for OEMs.

39. OPTISONIC 7300 Ultrasonic Flowmeter 9/16/2019

    The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F).

40. OPTISONIC 6300 Ultrasonic Clamp-On Flowmeter 9/16/2019

    The OPTISONIC 6300 is an ultrasonic clamp-on flowmeter for permanent mount installation. It is particularly suitable for flow measurement of (non-)conductive liquids at any location where inline measurement is not possible or desirable. The flowmeter consists of a combination of one or two clamp-on sensors and one ultrasonic signal converter. Its robust clamp-on rail is highly flexible and can be very easily attached to virtually any pipe up to DN4000 / 160".