Wastewater Flow Control Measurement Solutions

  1. Scrubber Application 1/27/2022

    This customer supplies district heating and electricity for the region of Sønderborg. For one of their waste applications a MAG meter failed within 6 months, and was successfully replaced with a Panametrics Aquatrans AT600.

  2. Optimizing Brine Flow In A Geothermal Power Plant 1/27/2022

    Different flow meter technologies were used in this geothermal power plant to monitor and measure brine. However, these traditional technologies failed. That’s where Panametrics PT900 Portable Ultrasonic Flowmeter was able to help.

  3. SITRANS FS290 Portable Clamp-On Flow Meter Test Kit 1/13/2022

    Each measuring path is formed by two coordinated transducers that transmit ultrasonic signals back and forth through the pipe. Using the transmit and receive time difference between the two signals, caused by the flow in the pipe slowing the transit time against the flow and accelerating the time with the flow, the transmitter calculates the resulting flow measurement.

  4. DigitalFlow™ DF868 Liquid Ultrasonic Flowmeter 1/11/2022

    The DigitalFlow DF868 is a full-featured, fixed-installation liquid flowmeter designed to meet all your flow metering and energy measurement needs. Its patented Correlation Transit-Time™ digital signal processing provides drift-free measurements in ultraclean and most “dirty” liquids. This includes fluids with gas bubbles and entrained solids that have previously required Doppler-type meters.

  5. XMTC Panametrics Thermal Conductivity Binary Gas Transmitter 1/11/2022

    The microprocessor-based XMTC is a compact, rugged, online thermal conductivity transmitter that measures the concentration of binary gas mixtures including hydrogen, carbon dioxide, methane, helium and many others. The analyzer also combines computer enhanced signal measurement with fast-response software, real-time error detection and digital communication via an RS232 or RS485 interface.

  6. PanaFlow ZxG Gas Meter System 1/11/2022

    The PanaFlow gas meter system consists of two models— the one-path PanaFlow Z1G and the two-path PanaFlow Z2G. Both meters offer a high-performance, yet affordable solution for a variety of gas flow applications.

  7. XMO2 Oxygen Transmitter 12/13/2021

    Proven robustness in hazardous area oxygen analysis. Designed for stability and longevity in oxygen percent measurement, the XMO2 can easily recover from process upsets and maintain high accuracy readings in hazardous areas.

  8. TransPort PT900 12/13/2021

    What happens when you combine the proven track record of the TransPort® PT878 (TransPort PT900’s powerful predecessor) with the latest technology? You get performance, productivity, and a better user experience. The TransPort is the next evolution, and it’s here to make your job easier than ever.

  9. AquaTrans™ AT600 12/13/2021

    The AquaTrans AT600 liquid flow ultrasonic transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point. It’s designed specifically for water and wastewater applications in full pipes. The all-digital AquaTrans AT600 has no moving parts and requires minimal maintenance.

  10. A Non-Intrusive Solution For Measuring Wastewater Flow In A WWTP's Iron Pipes 12/13/2021

    A municipal association needed to understand if wastewater was being equally distributed across two cast iron pipes within its wastewater treatment plant. Learn how clamp-on ultrasonic measurement helped successfully measure the flow.