Product Guide

  1. FlexRake® FS: Fine Screen
    2/1/2018

    A simple front-clean, front-return, mechanically-cleaned wedgewire screen technology. Utilizes stainless steel, wedgewire screen with .020 inch to .125 inch openings. 

  2. HYDROVEX® FluidSep Vortex Separator
    4/3/2008

    The HYDROVEX® FluidSep Vortex Separator is a tool in the treatment of CSO and Stormwater. The treatment relies on the properties of the controlled vortex to eliminate settleable suspended solids, as well as floatables carried by the incoming water

  3. FieldLogic™ Hand-held Device (HHD)
    4/28/2017

    The FieldLogic™ Hand-held Device (HHD) is a reliable, flexible electronic device used to collect and store meter readings and program SmartPoint® modules. You can upload pre-programmed route information from our PC-based FieldLogic software using Wi-Fi or the device’s Ethernet-enabled communications/charging stand as an interface. The unit comes with built-in capacity for expanded uses.

  4. Monster Metal™
    2/12/2018

    Monster Metal™ is an abrasion and corrosion resistant cutter alloy. It is a steel alloy with the perfect balance of carbon for strength with a Rockwell HRc of 55-60 and chromium for corrosion resistance typically associated with stainless steel. Monster Metal is available on 30004T and 30005 Muffin Monsters®, CMD-XD2.0 and CDDXD2.0 Channel Monsters® and the 3-HYDRO-IX and 3-HYDRO-C.   Monster Metal offers a longer life with at least double the life of typical industry cutters paired with a 5-year extended limited warranty.

  5. 14" - 48" Resilient Wedge Gate Valves With Mechanical Joint Ends - Spur Gear Actuator
    5/31/2011

    AMERICAN’s 14"-48" Series 2500 ductile iron resilient wedge gate valves are suitable for use in potable water, sewage and fire protection systems.

  6. Omnigrad M TR12
    4/9/2012

    All Endress+Hauser transmitters are available with enhanced accuracy, reliability and cost effectiveness compared to directly wired sensors.

  7. Baker Filtration Systems
    5/20/2009

    No other company offers a more comprehensive lineup of filtration equipment than BakerCorp, including high- and low-pressure carbon and specialty media vessels, odor control systems, sand filters, duplex cartridges, bag filters, and auxiliary equipment.

  8. Flow Measurement
    4/4/2012

    One for all - Endress+Hauser's multivariable metering. The ability to measure several process variables all at the same time opens up completely new application fields.

  9. Submersible Sludge Pump XJS 50
    8/2/2018

    The submersible sludge pump XJS 50 is ideal for pumping sludge and water mixed with solids. Pumps with built in AquaTronic unit will always have correct direction of impeller rotation, ensuring peak performance and reduced wear. 50 Hz: head max 28 meters, flow max 25 l/s. 60 Hz: head max 31 meters (102 feet), flow max 26 l/s (413 gpm).

  10. Aftersales Solutions And Services
    10/5/2015

    At De Nora, we are strongly committed to providing aftersales and service support for our entire equipmen portfolio and similar competitive equipment.