Product Guide

  1. WATERFLUX 3100 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX 3100 is an electromagnetic flowmeter (EMF) for all standard applications with raw, potable or abstraction water. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX 3100 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.

  2. Liquistation CSF48 4/3/2012

    Liquistation CSF48 is a stationary sampler for fully automatic sampling, distribution and storage of liquid media. It is based on the Memosens Liquiline platform and can thus easily be expanded to a complete measuring station.

  3. Foambuster 4/1/2015

    The patented Foambuster uses the same glass-lined ductile iron nozzles as Rotamix but also uses a stainless steel splashplate located below the nozzle to deflect the nozzle discharge and create a broad spray of sludge, which wets and breaks up foam forming on the surface of the digester. Digester sludge is pumped through the Foambuster either by the Rotamix Chopper Pump or by a separate Chopper Pump. When the Foambuster is used in conjunction with a tank mixing system, which produces a rotational mixing pattern in the tank, only one spray nozzle will be required for effective foam control.

  4. 14" - 48" Resilient Wedge Gate Valves With Mechanical Joint Ends - Spur Gear Actuator 5/31/2011

    AMERICAN’s 14"-48" Series 2500 ductile iron resilient wedge gate valves are suitable for use in potable water, sewage and fire protection systems.

  5. OPTIMASS 2400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis meter features Entrained Gas Management (EGMTM) for liquid applications, maintaining operation over a wide range of gas fractions and complex flow conditions. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase flow.

  6. DPI610E High Accuracy Handheld Pressure Calibrator 11/29/2021

    The DPI610E is a portable high-accuracy handheld pressure calibrator ideal for engine testing. With 0.025% FS accuracy and a total 1-year uncertainty, it provides stable pressure calibration from vacuum up to 1000 bar. The device is perfect for on-vehicle testing, ensuring accurate calibration and performance monitoring.

  7. AMI Codes-II CC 12/20/2011

    Colorimetric process analyzer (DPD-method) for measurement of disinfectants such as free chlorine, monochloramine, total residual chlorine and combined chlorine.

  8. RadarSens – Radar Level Sensor 3/1/2025

    The intrinsically safe level monitoring system utilizes advanced radar sensing technology to provide cost-effective, reliable, battery-powered wastewater level monitoring. This award-winning system, recognized with the Environmental Protection Award, is ATEX-certified for use in Zone 0 hazardous areas.

  9. Vacuum Assisted Pump, 4 in. By 3 in., Diesel Powered 3/24/2021

    Remove muddy water, sludge and grey water or transfer solid-laden liquids with this diesel-powered centrifugal pump.

  10. Ultrasonic Flow Meters - Clamp-On 11/20/2015

    The SITRANS FS230 digital clamp-on ultrasonic flow meter is a process-optimizing solution for measuring flow in virtually any liquid application. The FS230 is an ideal fit for many industries requiring high-quality liquid flow measurement.