Industrial Water and Wastewater Products

  1. 9210p On-line Total Organic Carbon Analyzer 5/22/2009

    OI Analytical introduces the Model 9210p On-Line Total Organic Carbon (TOC) analyzer. The 9210p uses proven heated persulfate oxidation with Solid State Non-Dispersive Infrared detector (SSNDIR) technology to monitor for organic contaminants in water streams for regulatory compliance and optimization of water treatment processes.

  2. ULTRAPEN™ PT3 ORP/REDOX & Temperature Pen 12/4/2012

    This instrument is designed to be extremely accurate, fast, and simple to use in diverse water quality applications.

  3. EPRO™ Commercial Reverse Osmosis (RO) Systems 9/4/2020

    EPRO™ Commercial Systems are designed to maximize water purification efficiency. Available models offer a choice of flow rates and configurations for removal of dissolved solids and other impurities from tap water or brackish water. Purified high-quality water is supplied to your application at existing point of use.

  4. ABB Ability™ For Water Distribution Network 8/2/2018

    $40 million cost reduction through real-time water distribution control.

  5. EST Dry Emergency Gas Scrubber Systems 10/6/2015

    De Nora Water Technologies’ EST dry emergency scrubbers are engineered to meet national codes for the mitigation of hazardous gas releases from pressurized 150-pound cylinders and one-ton containers of chlorine, sulfur dioxide, ammonia and other toxic gases.

  6. ABB Ability™ For Pumping Stations 8/2/2018

    Real-time control of a 360km water distribution system through an advanced distributed control system.

  7. KLa Systems Slot Injector Aeration System 10/28/2008

    The Slot Injector™ System is a superior jet aeration system that is specifically applied to industrial biological treatment processes where fine screening is a standard pretreatment operation in both conventional and advanced air activated sludge applications.

  8. EL 500 Series Electromagnetic Flow Meters For Low Flow And Small Line Sizes 11/29/2019

    The EL 500 Series flow meters allow accurate flow measurement in small lines sizes with very low flow rates. This meter series has five different sizes ranging between 1/8 to 3/4 inch. The flow tube is 316 stainless steel with NPT, ASIS 316 UNI 338 male threaded, triclamp / ISO 2852 or DIN 11851 connections. Connections and electrodes are supplied in 316L stainless steel as standard and are also available in Hastelloy C and Titanium on request.

  9. Pressure Filters 12/22/2011

    WesTech granular activated carbon (GAC) contactors are an effective means for removal of low-molecular-weight contaminants from aqueous solutions.

  10. MoTreat: Mobile Water Pre-Treatment System 4/20/2011
    MoTreat provides a mobile solution to treat flowback and produced water on-site at the well pad area to yield water with minimal total suspended solids (TSS) which enables recycle and reuse without the need for costly trucking to off-site treatment facilities.