Drinking Water Treatment Products

  1. WATERFLUX 3300 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX ,3300 is an electromagnetic flowmeter (EMF) for demanding water applications and custody transfer operations (MID MI-001, OIML R49; MI-004). The high-end meter is particularly suitable for applications requiring high accuracy and extensive diagnostics. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX ,3300 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.

  2. RPS/DPS 8000 Series (TERPS) 6/5/2025

    The RPS/DPS 8000 series incorporate the exciting new TERPS technology. TERPS is a resonant silicon pressure sensor technology platform that provides an order of magnitude greater accuracy and stability than current pressure measurement technologies.

  3. LuminUltra Water (QGA) 6/1/2016

    Using a single analysis, LuminUltra Water (QGA) provides a rapid and interference — free determination of total microbiological concentration in any filterable water sample with a wide detection range. Use this test kit to perform source-to-tap surveys and characterize complete systems, identify areas of concern, and validate corrective action — all in the same shift!

  4. Lead In Facilities – Sampling In Schools And Daycare 1/30/2020

    Making results data public is key to your lead programs success. Easily download reports to share with state and district stakeholders.

  5. Capital Controls® Series 200 Vacuum Gas Feeders 10/8/2015

    ADVANCE™ Series 200 gas feeders are designed for or automatic gas regulation. Automatic operation requires a simple addition of a motorized control valve.

  6. COP™ Spiral Blade Clarifier 12/21/2011

    The WesTech COP™ Spiral Blade Clarifier is the result of research and design focus on building a better clarifier. Each COP Spiral Blade Clarifier is designed for the specific process requirements of each plant.

  7. Whittier™ Filtration and Separation 11/16/2006

    Whittier Filtration offers a broad range of advanced filtration treatment solutions for the removal of solid matter and impurities from liquid streams and for oil/water separation. Technologies include precoated pressure leaf filters, nutshell filters, media filters and softeners

  8. OPTISONIC 6300 P Ultrasonic Clamp-On Flowmeter 9/16/2019

    The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. As standard the clamp-on flowmeter is also provided with a measurement option for thermal energy applications.

  9. Modular Onsite Storage Systems 6/26/2020

    With the high cost of infrastructure replacement and demands for more stringent environmental standards, newterra modular treatment systems are driving the adoption of decentralized solutions.

  10. GDT Mixing & Contacting Systems 5/19/2017

    The GDT Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor.