Drinking Water Products

  1. Aztec 600 Aluminum Analyzer
    6/18/2010
    The Aztec 600 Aluminium Analyzer AW631 has been designed specifically for the measurement of aluminium in potable water applications. It offers reliable, and accurate, on-line analysis of aluminium up to 2 ppm.
  2. SL1000 Portable Parallel Analyzer™ (PPA) Platform
    10/10/2014

    The new Hach SL1000 Portable Parallel Analyzer (PPA) performs the same tests with less than half the manual steps. Get highly accurate results, with less opportunity for errors, in a fraction of the time. Up to six parameters, tested simultaneously.

  3. Enclosed Industrial Clean Power VFDs – Controlling Water Everywhere It Goes
    4/26/2017

    Moving water and controlling water systems is no easy task. There are many variables involved with fluid dynamics, the addition of environmental, harmonics and energy cost concerns make system control even more difficult. Eaton understands these problems and provides enclosed drives solutions for water/wastewater. From NEMA 4X enclosures to our Active Energy Control algorithm and five-year warranty, Eaton provides a complete solution for water/wastewater applications.

  4. MARINER OMNIPURE® Series M55 Marine Sewage System
    10/5/2015

    The MARINER OMNIPURE® Series M55 marine sewage treatment units offer a unique approach to wastewater treatment on smaller vessel, workboat and yacht applications. MARINER OMNIPURE Series M55 features a bulkhead mounting arrangement — a first of its kind — that provides safe and effective treatment of the wastewaters on board your vessel. The system results in discharge effluent quality well within the MEPC.159(55) requirements.

  5. TrojanUVTelos™ — Drinking Water Disinfection System
    10/9/2014

    TrojanUVTelos™ (télōs) is the latest evolution of UV for small communities and was created to address the needs of the energy- and maintenance-conscious buyer. This advanced system utilizes TrojanUV Solo Lamp™ Technology and TrojanUV Flow Integration (FIN™) hydraulic optimization technology, which leads to low power consumption, uniform UV dose delivery and a low lamp count. With these features, the advantages of TrojanUVTelos are clear — lower life cycle costs, easy maintenance and reduced environmental impact.

  6. UltraDynamics® Municipal UV Solutions Ground Water
    10/6/2015

    The advantages which have made ultraviolet irradiation an effective, and the fastest growing, disinfection technology for wastewater are now available for primary disinfection of municipal drinking water.

  7. TrojanUVSwift™ECT — Environmental Contaminant Treatment System
    11/6/2006

    The TrojanUVSwift™ECT is a hydraulically optimized, polychromatic lamp-based UV reactor for use in the treatment of environmental contaminants. It is suitable for removing contaminants from large flow rates within a compact footprint.

  8. ETS-UV™ For Drinking Water
    2/4/2014

    Drinking water facilities are under pressure to do more with less. Public safety and water quality cannot be compromised so it's important to incorporate solutions that are proven to perform. A number of ETS-UV™ disinfection systems have been validated by an independent third party for drinking water in accordance with the US EPA Design Guidance Manual and NSF/ANSI Standard 61.

  9. Double-See Double Containment
    10/27/2016

    This vinyl double containment piping system is fast and easy to install, and is available with a complete selection of pipe, fittings, and valves. Additionally, an innovative "valve-in-valve" design is offered which allows full containment pressure rating. Double-See™ is available in PVC and CPVC; either material may be primary or secondary (PVC x PVC, CPVC x PVC, CPVC x CPVC) with Clear PVC always being an option for the containment pipe. System size options range from 1/2" x 2" to 6" x 10", meeting virtually any application requirement. Installation versatility allows simultaneous joining throughout a system or in combination with patented closure couplings which enable practical compliance with the ASME B31.3  requirement for visual inspection of all primary joint connections during the pressure test before closing the secondary piping joint.

  10. XT IEC Power Control – Protect And Improve Your Pumping System
    4/26/2017

    Eaton’s line of XT IEC contactors, motor protectors, overload relays and starters are engineered with your pumping application in mind. With a robust design, high reliability and product efficiency, XT can give you the high-end performance that your customers expect in a quality pumping system.