Drinking Water Products

  1. UltrapenX2™ PTBT2 Bluetooth® Enabled pH And Temperature Pen 6/10/2022

    The PTBT2 is a lab-accurate water quality pocket tester that allows you to use your mobile device and the X2 app to measure, store and export data.

  2. TIDALFLUX 2300 Electromagnetic Flowmeter 8/26/2019

    The TIDALFLUX 2300 is an electromagnetic flowmeter (EMF) with a patented, capacitive level measurement for use in partially filled pipes (up to DN1600 / 64”). The meter is the ideal solution for flow measurement of municipal or industrial wastewater in pressureless transport lines. However, the EMF is also suitable for measurement of effluent brine from dredging, mining or sea/well water injection applications. Unlike open channel systems (Venturi, V-notches etc.) the inline flowmeter is a closed measuring solution without obstructions and with a much better accuracy at lower total costs of ownership.

  3. Field Pilot Studies 10/15/2018

    Pilot tests conducted at numerous facilities demonstrate that Loprest treatment processes successfully reduce iron, manganese, arsenic, nitrate, and many other select contaminants in drinking water to well below the Maximum Contaminant Level (MCL). Loprest can provide self-contained portable, free-standing pilot units or mobile, trailer-mounted units, depending on specific testing needs at each site.

  4. 1100 MEGALUG® Mechanical Joint Restraint 12/4/2020

    The Series 1100 MEGALUG® Mechanical Joint Restraints effectively and economically restrain Ductile Iron Pipe (DIP) to mechanical joints above or below ground, for practically any application including valves, hydrants, and pipe. For use on all classes of ductile iron pipe (PC350 through PC150 and CL56 through CL50) without damage to the pipe or cement linings. It can also be used on steel pipe and cast iron pipe when joining to mechanical appurtenances, see product brochure for more details on these pipes.

  5. Aqueous Electrostatic Concentrator 12/14/2021

    The Aqueous Electrostatic Concentrator's (AEC) modular design provides a small footprint and low energy consumption, and it can be skidded, trailer-mounted, or custom configured to fit into existing spaces.

  6. WATERFLUX 3050 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX 3050 is an electromagnetic flowmeter (EMF) for basic water applications. It offers cost-effective flow measurement in applications where extremely high accuracy, extensive diagnostics or a wide range of digital communication options are not a priority. Its measuring tube with a rectangular and reduced cross-section enables a stable measurement even at low flow rates. Due to the optimized flow profile, the meter is practically independent of interferences from the installation environment. It can be installed virtually anywhere without straight inlet or outlet runs – behind pipe bends, slide valves or a reduction in the pipe.

  7. Capital Controls® VEGA™ Gas Chlorinator Vent Exhaust Gas Arrestor 10/6/2015

    The Capital Controls® VEGA™ is a disposable chlorinator vacuum regulator vent gas arrestor designed to treat occasional chlorine gas vent releases that may accompany chlorine container changeovers and fouled vacuum regulator inlet valves. The field tested VEGA prevents nuisance tripping of chlorine room air sensor alarms; helps compliance with local, state and federal code restrictions against exhausting chlorine fumes outside of a building; keeps the building free from chlorine related acid corrosion.

  8. PPG Filtration Technologies: 8040 12/6/2019

    Proprietary Composite Spiral Element. Available in Fiberglass and Netting Wrap configurations. Anti-Telescoping Device (ATD) both ends. Brine seal (one end) - Fiberglass Wrap only.

  9. OPTIMASS 6400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the OPTIMASS 6400 the optimum device for cryogenic media like Liquefied Natural Gas (LNG) with temperatures down to -200°C / -328°F as well as applications involving high operating temperatures (up to 400°C / 752°F) or pressures (up to 200 barg / 2900 psig).

  10. New! Fully Assembled Lightweight And Compact Complete Metering System 1/23/2025

    Looking for a Skid Mounted Complete Metering System, but your equipment room is short on space? The New CHEM-FEED CFCS is engineered for small spaces. It features a compact design and small footprint. The skid is constructed of tough, lightweight chemical and UV-resistant polyethylene, and it ships fully assembled with all necessary components for easy install and fast startup.  Wall or Shelf Mount. One or Two Pump Models.