Drinking Water Products

  1. Hydra-Q.I.K – Quick Install Kit

    Designed exclusively for Hydra-Stop Insta-Valve Installation Equipment.

  2. Thermatel® TD1/TD2 Thermal Dispersion Flow/Level/Interface Switch

    TD1 and TD2 Thermal Dispersion flow/level/interface switches provide a new level of performance and reliability not found in previous switches. 

  3. RTP Field Assembly
    Plas-Tanks Industries’ capabilities include shop-built, shop-built and field assembled, and field fabricated FRP vessels.
  4. ORION® Endpoints

    Built on a century of water metering experience, the ORION® product family has provided utilities comprehensive Advanced Metering Analytics (AMA) for interval meter reading and data capture using both one-way and two-way communications.

  5. AirPro Max® Air Valve

    The comprehensive new AirPro Max air valve line features all ductile iron bodies and covers as well as 316 stainless steel floats and trim.

  6. High Flow Cartridges
    Shelco’s High Flow filter cartridges are designed for flow rates up to 500 gallons per minute in a single element configuration. The large, single-cartridge pleated High Flow filters provide up to 100 square feet of surface area for increased dirt-holding capacity (and reduced long-term filter costs). Shelco’s High Flow cartridges are thermally bonded and made from multi-layers of FDA-compliant polypropylene microfiber. The inside-out flow retains contaminant during change-outs and the cartridges are offered in micron ratings from .5 – 100 micron.
  7. OPTISONIC Ultrasonic Flowmeter - KROHNE, Inc.

    The OPTISONIC 7300 offers an ultrasonic measurement system dedicated for process gas flow applications with no maintenance, no recalibration and no moving parts. 

  8. Capital Controls® Gas Feeder Series WM4000

    Capital Controls Series WM4000 gas feeders are wall cabinet mounted vacuum operated and designed to conveniently house a combination of gas feed equipment. The fibreglass cabinets enclose the gas flow control components.

  9. OPUS® II Technology - a New Innovation for High Recovery of Water for Reuse

    OPUS® II is a proprietary process for high recovery of complex wastewater streams. This new innovation uses CeraMem® ceramic membranes as pretreatment for reverse osmosis to reduce the system footprint. OPUS II can be delivered in modular, containerized units to minimize installation costs.

    Like the original OPUS technology, OPUS II effectively removes silica, organics, hardness, boron, strontium and particulates. It generates high quality effluent at a high recovery rate, providing clean water for discharge, recycle or reuse.

  10. ecoFIT Metric Industrial HDPE

    ecoFIT PE100 Industrial Polyethylene ushers in a new generation piping system designed specifically for broad-based applications. The dynamic combination of specifiable pipe, fittings, valves, and advanced fusion technologies integrates well into the industrial process industry.