Drinking Water Measurement

  1. Dealing With The Highs And Lows Of Flow
    5/4/2015

    In February of 2014, due to severe drought conditions, the Federal Bureau of Reclamation informed central California farmers that they would receive no irrigation water from the lakes, canals and reservoirs under the Bureau’s control.

  2. Online TOC Analysis In The Drinking Water Treatment Process
    4/22/2015

    In 1974 the Congress of the United States passed Public Law 93-523; the Safe Drinking Water Act (SDWA) to protect public health by regulating the nation’s drinking water supply and protecting sources of drinking water. The SDWA first went into effect on June 24, 1977 and has been amended multiple times.

  3. How To Install pH Sensors
    3/25/2015

    This article is for those of you who need to install a new or redo an existing pH loop. These tips can help ensure accurate and consistent readings.

  4. North Carolina Treatment Plant Eliminates Taste And Odor Issues With Ozonation
    3/9/2015

    Enactment of the Long Term 2 Enhanced Surface Water Treatment Rule and the Stage 2 Disinfectant-Disinfection Byproduct Rule (D/DBPR) will require both large and small drinking water utilities to reduce total organic carbon (TOC), Cryptosporidium, and disinfection byproducts (DBPs) in the treated drinking water distributed to the public.

  5. Clari-DAF® System Provides Effective TOC Removal For Cambridge WTP
    3/9/2015

    To ensure treated water complied with the most stringent drinking water standards, including the Environmental Protection Agency (EPA) Stage 2 Disinfectants and Disinfection Byproducts Rule (State 2 DBPR), the City of Cambridge, MA, WTP decided to implement a robust multibarrier treatment solution.

  6. Portable Parallel Analysis: Streamlining Distribution System Water Testing
    3/6/2015

    A Water Quality Specialist used the Hach SL1000 Parallel Portable Analyzer (PPA) to test 6 parameters simultaneously – all within about 8 minutes.  Previously, the procedure took 20 minutes just for one parameter.

  7. Optimize Energy And Resource Usage
    2/17/2015

    Through the implementation of a WAGES (Water, Air, Gas, Electricity and Steam) monitoring solution, a brewery was able to optimize energy and resource usage while boosting capacity to meet the demands of U.S. customers. Water usage costs were reduced by 28%; the brewery’s carbon footprint was reduced creating a savings of $2 million/year from CO2 recovery; compressed air usage was reduced by 15%; and fuel oil costs were reduced by $34,000.

  8. Advanced Metering Analytics And Hi-Res Ultrasonic Meters Create A Winning Combination
    2/9/2015

    When Waterworks District 3 of Beauregard Parish, La., began to research new water meters to replace its aging system, it didn’t take long to decide that the BEACON AMA managed solution was the right fit.

  9. Mass Or Volume? A Weight Off The Bottom Line
    1/12/2015

    Confusion often arises over the difference between mass and volume flow measurement and when a particular measurement should be applied.

  10. What Four Savvy Operators Know About Mag Meters Saves Time, Money, And Headaches
    1/5/2015

    If your flow meter is costing you time and money ... and that all adds up to real operational headaches, then you might want to hear what four McCrometer customers who installed the FPI Mag Flow Meter have to say about this problem-solving flow instrument.