Drinking Water Measurement Solutions

  1. WATERFLUX 3100 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX 3100 is an electromagnetic flowmeter (EMF) for all standard applications with raw, potable or abstraction water. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX 3100 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.

  2. Flow Monitoring At Sea Water Reverse Osmosis Plant Improves Water Distribution 1/6/2025

    Read about a desalination plant that was in need of a practical verification methodology for permanent and/or temporary (portable) solutions on large pipes.

  3. UltrapenX2™ PTBT5 Bluetooth® Enabled Dissolved Oxygen (DO) & Temperature Pen 6/10/2022

    The PTBT5 is a lab-accurate water quality pocket tester that allows you to use your mobile device and the X2 app to measure, store and export data.

  4. OPTIMASS 6400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the OPTIMASS 6400 the optimum device for cryogenic media like Liquefied Natural Gas (LNG) with temperatures down to -200°C / -328°F as well as applications involving high operating temperatures (up to 400°C / 752°F) or pressures (up to 200 barg / 2900 psig).

  5. TOC Analysis: The Best Tool In A Drinking Water Facility's Toolbox 5/3/2019

    SUEZ Water Technologies & Solutions designs and manufactures Sievers Total Organic Carbon (TOC) Analyzers that enable near real-time reporting of organic carbon levels for treatment optimization, quality control & regulatory compliance. TOC has a wide range of applicability at a drinking water plant, and therefore any drinking water utility — large or small — can measure TOC in their laboratory or online in their treatment process.

  6. Leak Detection On Water Distribution Network Using Clamp-On Flowmeters 5/22/2023

    A global engineering company realized that their leak identification methods were time consuming and expensive, and so began to explore alternative solutions, such as ultrasonic flow meters. 

  7. Particle Counter 12/28/2011
    The PC3400 online particle counter sets the newest standard for particle counting instruments used in the water treatment industry today.
  8. Alcoholic Beverage Fusel Alcohol Testing With Static Headspace 9/2/2014

    A static headspace method was developed using Teledyne Tekmar automated headspace vial samplers to meet the method requirements of the Alcohol and Tobacco Tax and Trade Bureau of the US Department of the Treasury (TTB) method SSD: TM:2001 for testing fusel alcohols in alcoholic beverages.

  9. Analysis Of Pesticide Residue In Spinach Using The AutoMate-Q40 An Automated QuEChERS Solution 10/16/2014

    QuEChERS is a Quick-Easy-Cheap-Effective-Rugged-Safe extraction method that has been developed for the determination of pesticide residues in agricultural commodities.

  10. The Process Of Deionizing Water 10/29/2021

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.