Contaminant Removal Products

  1. Liquid Ammonium Sulfate Feed Systems
    11/18/2016

    IMS’s custom-designed, modular LAS Feed Systems for water processes are pre-assembled, factory-piped, wired and tested, offering low installation costs and typical installation time of only 2 hours.

  2. Injection Skids
    5/19/2017

    Mazzei injection systems are designed using the Mazzei’s patented technologies to obtain the most efficient mixing and contacting of air, oxygen, ozone or chemicals into a water stream.

  3. Aqua ElectrOzone™ Ozone Generation System
    7/13/2016

    Ozone treatment for water and wastewater has been utilized successfully for several decades and continues to be a viable disinfection solution for both municipal and industrial plants, worldwide.

  4. Aqua-Jet® SS-PW Surface Aerator For THM Removal
    1/23/2017

    The Aqua-Jet® SS-PW surface mechanical aerator, manufactured by Aqua-Aerobic Systems is certified to NSF/ANSI 61 by UL for use in potable water applications. These units can be utilized for THM stripping applications or circulation in potable water treatment systems and reservoirs with a minimum volume of 100,000 gallons.

  5. E33 Adsorption Systems
    8/1/2016

    In the adsorption process, contaminants break their bond with the water molecules and chemically adhere to a filter media. This is typically accomplished by directing the water flow through pressure vessels containing the filter media at a rate that allows enough contact time for adsorption to occur. AdEdge Water Technologies’ Bayoxide E33 adsorption media is the industry standard for arsenic removal. This granular ferric oxide media reduces up to 99% total arsenic, including both Arsenic (III) and Arsenic (V).

  6. Pipeline Flash Reactors for Mixing & Contacting
    5/19/2017

    Pipeline Flash Reactors™ (PFRs or spool pieces) utilize high velocity mixing to transfer ozone or oxygen-enriched sidestreams into bulk water flow, all within a compact footprint. With a PFR, ozone or oxygen mass transfer occurs in the pipeline within seconds, eliminating the need for additional tanks or basins. Whether it is providing ozone for water purification or increased dissolved oxygen for wastewater, Mazzei’s PFR uniformly distributes gas into the water and minimizes the size and cost of gas contacting.

  7. Aqueous Ammonia Feed Systems
    11/18/2016

    The IMS packaged Aqueous Ammonia Feed Systems include a heavy duty pressure rated aqueous ammonia storage tank, integral ammonia fume scrubber, peristaltic dosing pump, instrumentation and controls in a fully contained, pre-assembled skid.

  8. GDT Mixing & Contacting Systems
    5/19/2017

    The GDT™ Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor™. From there the two-phase flow travels to the Degas Separator (DS) & Relief Valve for additional mixing and entrained gas removal. And finally, the MTM Mixing Nozzles force dissolved ozone flow into the untreated water in the pipeline or basin for thorough mixing.

  9. SORB 33® ARS Series Arsenic Removal Systems – Pre-engineered For Faster Delivery And Simple Installation
    2/7/2017

    De Nora’s SORB 33® arsenic removal adsorber systems use our proven and effective arsenic removal media that removes arsenic to non-detect levels. Systems are pre-engineered for faster delivery times and simple installation.

  10. Lug Style Butterfly Valve: Type 578
    5/12/2016

    The Type 578 Lug Butterfly Valve has several beneficial design features unique to the Georg Fischer butterfly valve line. The double eccentric operating principle has an off-center disc and shaft that disengages the disk from the seal with only 3 degrees of rotation.