Clean Water Disinfection SOLUTIONS

  1. ASM-10-HP Application Note 3/12/2026

    ResinTech ASM-10-HP is a strongly basic hybrid anion exchange resin specially formulated to selectively remove arsenic.

  2. MagnaPak™ DOC Removal Systems 10/5/2005

    The MagnaPak™ System provides a simple, cost-effective solution for meeting EPA disinfection by-product standards by utilizing the MIEX® ion exchange resin to remove dissolved organic carbon – a precursor to DBP formation – from the raw water supply

  3. SIR-110-HP (PFAS Removal) 3/12/2026

    ResinTech SIR-110-HP is a WQA Gold Seal certified gel resin engineered for longchain PFAS removal, purposebuilt for residential drinking water applications.

  4. GWT Zeroturb Bio-Organic Liquid Flocculant 2/18/2021

    GWT advanced ZeoTurb™ is a unique advanced bio-organic liquid flocculant.

  5. Bardac® LF 18 — A Novel Cooling Water Algaecide 10/23/2020

    The active ingredient in Bardac® LF 18 is dioctyl dimethyl ammonium chloride. This product comes in two concentrations: -10WT (10% w/w) and -50WT (50% w/w). Several chemical properties of this product yield key benefits that set it apart from other industrial cooling water products. It is a quaternary ammonium compound (quat). Quats are typically low cost and highly effective biocides for a broad spectrum of organisms.

  6. Ozone Destruction System 4/16/2014

    NeoTech Aqua Solutions’ line of 254 nm wavelength low-pressure lamps effectively destroys residual ozone and a member of our technical staff will professionally size your UV system. 

  7. Ecoray® Upgrade Kits 8/6/2015

    Stay compliant and slash your energy costs by 30% with Ecoray Upgrade Kits.

  8. TrojanUVSwiftSC — Drinking Water Disinfection System 11/6/2006

    The TrojanUVSwift®SC is designed to treat flow rates of 20 gallons per minute (GPM) to 16 million gallons per day (MGD) or 4.5 to 2,525 m3/hr. These compact UV systems offer communities an economical solution for drinking water disinfection.

  9. LuminUltra Water (QGA) 6/1/2016

    Using a single analysis, LuminUltra Water (QGA) provides a rapid and interference — free determination of total microbiological concentration in any filterable water sample with a wide detection range. Use this test kit to perform source-to-tap surveys and characterize complete systems, identify areas of concern, and validate corrective action — all in the same shift!

  10. Carbon Systems 10/15/2018

    Loprest designs and manufactures granular activated carbon (GAC) treatment systems for taste and odor applications, chlorine removal, PFC’s, 1 2 3 TCP, PCE/TCE, 1 4 dioxane, and many other contaminants. Loprest has a long, successful history in the selection and application of the proper carbon media for the application.