KROHNE Products

  1. OPTISYS TUR 1050 Turbidity Measuring System
    7/22/2008

    The compact OPTISYS TUR 1050 turbidity measuring system uses the 90° scattered light method to scan liquid samples in glass cuvettes. This means that the measurement optics are not directly exposed to the sample and thus require less maintenance

  2. OPTISYS CL 1100
    7/22/2008

    In the OPTISYS CL 1100, free chlorine is measured by a sensor with a three-electrode design, which has very long lifespans, thanks to the patented ASR cleaning system. Measurement takes place in a Plexiglas assembly, which is ideal for visual inspection and can be optionally expanded with pH measurement, in order to guarantee measurement accuracy with strongly deviating pH values.

  3. ENVIROMAG 2000 Electromagnetic Flow Sensor
    10/31/2007

    The ENVIROMAG 2000 magmeter is the optimum solution for North American water and wastewater measurement applications. It’s design and performance makes it the choice for flow measurement throughout the process.

  4. Instrumentation: OPTIFLUX 1000 Electromagnetic Flow Sensor
    2/15/2005

    The OPTIFLUX 1000 electromagnetic flow sensor is an economical solution for a wide range of applications. The flowmeter can be used in applications (including various aqueous solutions), where other measurement techniques were previously used.

  5. Instrumentation: OPTIFLUX 2000 Electromagnetic Flow Sensor
    2/15/2005

    The Optiflux 2000 electromagnetic flow sensor is the optimum solution for water and wastewater applications.

  6. Instrumentation: OPTIFLUX 4000 Electromagnetic Flow Sensor
    2/15/2005

    The OPTIFLUX 4000 electromagnetic flow sensor is the proven choice when selecting a flowmeter. This versatile flowmeter is suitable for almost all applications in all industries.

  7. Instrumentation: IFC 100 Electromagnetic Flow Converter
    2/27/2008

    With the IFC 100 instrumentation, KROHNE presents a new electromagnetic flow converter that provides a wide range of capabilities with outstanding cost effectiveness. The IFC 100 was developed for instrumentation applications in which an economical solution for the measuring problem at a high technological level is required

  8. Instrumentation: TIDALFLUX Electromagnetic Flowmeter
    2/15/2005

    The TIDALFLUX 2000 flow sensor with integrated and non-contact capacitive level measuring system provides accurate flow measurement in partially filled pipes. TIDALFLUX is designed to measure reliably between 10% and 100% of the pipe cross section. The integrated level sensors in the liner are in no contact with the liquid and are therefore insensitive against fat and oil floating on the surface.

  9. Instrumentation: OPTIFLUX Electromagnetic Flowmeter
    11/15/2004

    Electromagnetic flowmeters can be used in almost all branches of industry for the measurement of liquids (with or without solids content)pulps, pastes and other fluids that have a specific minimum of electric conductivity

  10. Instrumentation: OPTIFLUX 5000 Electromagnetic Flow Sensor
    2/15/2005

    The electromagnetic flow sensor OPTIFLUX 5000 is considered to be the most accurate and hard-wearing, robust flowmeter available in the market today.