05.19.26 -- Rethinking Master Planning In A Data-Rich Environment; A New Way To Capture Water From Air

Early vendor collaboration helps engineers avoid costly pump design mistakes by providing application expertise, advanced analysis tools, and insights that ensure wastewater pumping systems perform reliably from startup onward.

Cyclopure was invited to replace ion exchange resin to remove PFAS from groundwater at a groundwater pump station, located in New Jersey. The decision to replace IXR was due to poor PFAS removal caused by manganese fouling.

Strongly loaded organic industrial wastewater, i.e., from sugar or paper factories, need to be pretreated before determining the BOD value.

Relying on assumptions when designing water treatment systems creates unnecessary financial and operational risks. Adopting predictive modeling and data-driven testing provides the precise, actionable insights required to optimize performance, manage costs, and ensure compliance.

A water filtration treatment plant was built in 1950, and pneumatic actuators were installed on all the filter control valves. The pneumatic actuators were not always reliable. Air compressor problems limited the availability of the pneumatics to control the filter valves.

This document outlines the essential steps required to exchange spent media, including disposal of spent media.

Explore how Oneida's water department went from dealing with water loss, partnering up and solving the challenge, and getting unexpected results. 

When it was determined that the septic tanks and drainfields at Stinson Beach were coming to the end of their useful lives, the Golden Gate National Recreation Area looked for a cost-effective replacement that would not be overly noticeable to park visitors.

Rising city populations, high consumption of resources, aging infrastructure, climate change, complex water distribution systems — these are but a few issues forcing those in city management to rethink their sustainability and efficiency efforts. 

Industrial power plants or co-generation power plants utilize steam for industrial purposes other than power production.

Discover how Gulf Coast Water Authority (GCWA) leverages ASTERRA’s advanced satellite technology to detect hidden leaks and proactively monitor canals across their extensive system.

Discover why membrane bioreactors (MBRs) are widely acknowledged as the “best available technology” for wastewater treatment by experts.

Design Generator (“DG”) is a web-based, online water facility design engineering platform that enables engineering professionals to rapidly generate preliminary engineering designs for CAS facilities as well as MBR, MBBR, and others.