Wastewater Treatment Products

  1. AquaSBR® Sequencing Batch Reactor 1/10/2005

    The AquaSBR can treat a wide range of domestic and industrial wastewaters, at flows ranging fromm a few thousand gallons to millions of gallons per day.

  2. ClearLogic® Membrane Bioreactor 7/23/2015

    The ClearLogic membrane bioreactor (MBR) provides peace of mind to its owners through WesTech’s 40+ years of designing reliable and practical wastewater treatment solutions. Customers choose WesTech for superior service and the ability to provide complete systems that can include all instrumentation and control systems, as well as headworks and tankage.

  3. SedVac Sediment Removal System 4/28/2015

    Unlike traditional pipe systems, the Brentwood SedVac cleans all the way down to the basin floor without clogging. SedVac’s unique design funnels the sludge and scrapes the floor, resulting in consistent solids removal of 3 percent concentration while wasting less water than traditional pipe systems. These features mean less interruptions in production and no more hosing down your basin.

  4. OPTIMASS 2400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis meter features Entrained Gas Management (EGMTM) for liquid applications, maintaining operation over a wide range of gas fractions and complex flow conditions. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase flow.

  5. OxyStream™ Oxidation Ditch 1/8/2015

    The OxyStream™ Oxidation Ditch from WesTech Engineering has proven to be the ideal equipment for biological wastewater treatment applications throughout the world. It combines vertically mounted, low-speed surface aerators with an oxidation ditch design to maximize oxygen transfer efficiency while maintaining the greatest flexibility for power turndown. In addition, the OxyStream™ has greater side water depths and fewer required aerators than a conventional brush rotor or disc rotor oxidation ditch. The vertical slow-speed surface aerator eliminates maintenance-prone horizontal shafts, pillow block bearings, and drive units near the water surface. Above all, the OxyStream™ Oxidation Ditch provides energy savings and produces predictable, high-quality effluent.

  6. Biothane Lab Testing 8/27/2009

    Biothane Lab Testing by Veolia Water Technologies

  7. Prosonic M FMU41 4/4/2012

    Endress+Hauser continues to expand production of Level and Pressure measuring instruments.

  8. Wallace & Tiernan® Analyzers and Controllers 12/16/2014

    Wallace & Tiernan MFC analyzer/controller offers a broad combination of drinking water analysis and disinfection/chemical control in a single unit.The MFC analyzer/controller offers an easy, software selectable range of control modes from flow proportional, residual control only, compound loop and set point trim enabling precise control of a chlorinator or metering pump to maintain the desired level of disinfection and water quality.

  9. Laser Process Analyzer: LGR-ICOS™ 927 Series 8/6/2018

    With no consumables or frequent calibration requirements, LGR-ICOS laser process analyzers can significantly improve process monitoring and control of industrial and environmental processes and other applications requiring fast, sensitive quantification of trace gases in ambient air, high purity gases, or in complex matrices.

  10. Vertical Wet Well Centrifugal Chopper Pumps 12/6/2005

    Vaughan's wet well centrifugal chopper pumps have cast alloy steel chopper impeller, cutter bar and cutter nut...