Wastewater Measurement Solutions
-
DPI620 GENii And PV624: HighAccuracy Handheld Pressure Calibrator And Base Station
6/5/2025
The DPI620 GENii is a high accuracy handheld pressure calibrator which is ideal for engine testing due to its 0.0185% FS accuracy. With fast acting pressure generation up to 20 bar within 30 seconds, on vehicle test and calibration can be performed with confidence.
-
DPI610E High Accuracy Handheld Pressure Calibrator
6/5/2025
The DPI610E is a portable high-accuracy handheld pressure calibrator ideal for engine testing. With 0.025% FS accuracy and a total 1-year uncertainty, it provides stable pressure calibration from vacuum up to 1000 bar. The device is perfect for on-vehicle testing, ensuring accurate calibration and performance monitoring.
-
Calibration Adaptors
6/5/2025
A regular calibration check is essential to meet local or national quality practice. This requires a level sensor to have a known pressure applied and the output measured.
-
Sink Weights
6/5/2025
Many submerged sensor applications require additional weight to prevent incorrect datum reference due to “cable snake.”
-
Cable Clamp
6/5/2025
In many surface and ground water applications there has been no easy or cost-effective way to hold a sensor cable at the water exit point, until now. This clamp secures a sensor cable and prevents the vent tube in the sensor cable from becoming constricted. The slide mechanism of the cable clamp makes installation an easy task.
-
STE Sensor Termination Enclosure
6/5/2025
This sealed “junction box” receives the special “vented” type sensor cable from a Druck sensor and connects to a less expensive, non-vented, proprietary sourced instrument cable. It allows barometric reference pressure to enter the enclosure while providing a block to water/humidity entering and condensing in the assembly.
-
DPS5000 SDI-12 Digital Pressure Sensing Platform
6/5/2025
The DPS5000 SDI-12 from Druck, part of the UNIK5000 family, offers integrated digital electronics to enhance the performance level of the UNIK 5000 Pressure Sensing Platform to levels unmatched by traditional analogue sensors. It uses SDI-12 protocol, over which fully compensated readings of pressure and temperature are sent, as well as control of many functions of the device.
-
DPS5000 I2C Digital Pressure Sensing Platform
6/5/2025
The DPS5000 I2C from Druck, part of the UNIK5000 family, offers integrated digital electronics to enhance the performance level of the UNIK 5000 Pressure Sensing Platform to levels unmatched by traditional analogue sensors. It features an I2C digital interface, over which fully compensated readings of pressure and temperature are sent, as well as control of many functions of the device.
-
RPS/DPS 8000 Series (TERPS)
6/5/2025
The RPS/DPS 8000 series incorporate the exciting new TERPS technology. TERPS is a resonant silicon pressure sensor technology platform that provides an order of magnitude greater accuracy and stability than current pressure measurement technologies.
-
UNIK5000 Series Pressure Sensing Platform
6/5/2025
The new UNIK 5000 is a high-performance configurable solution to pressure measurement. The use of micromachined silicon technology and analogue circuitry enables best-in-class performance for stability, low power, and frequency response. The new platform enables you to easily build up your own sensor to match your precise needs. This high-performance, configurable solution to pressure measurement employs modular design and lean manufacturing techniques.