Wastewater Instrumentation White Papers & Case Studies

  1. The Eaton M-Max VFD Provides QuantumFlo With A Cost-Effective, Energy Efficient Solution
    4/26/2017

    Achieving consistent water pressure is a challenge for geographical areas that have grown faster than the development of infrastructures to accommodate water demand and for businesses such as fast food restaurants and strip malls.

  2. Sheboygan Regional Wastewater Treatment Facility Prevents Energy Waste With Eaton’s Motor Insight
    4/26/2017

    To ensure real-time monitoring of pump motor status at its five lift pumping stations, Sheboygan Regional Wastewater Treatment Facility, Sheboygan, WI, replaced its bi-metallic overload relays with Eaton’s Motor Insight™ overload and monitoring relays.

  3. Biological Water Treatment: Only The Best Instruments Are Good Enough
    2/28/2017

    Vallviks Bruk AB, located about 200 km (125 miles) north of Stockholm, produces softwood kraft pulp and chemical pulp for export. Some years ago, increased environmental requirements led to a major investment in a biological treatment plant. Read the full case study to learn why ABB instrumentation was an obvious choice when the Swedish pulp producer Vallviks Bruk AB built a new plant for biological water treatment.

  4. WSSC Achieves Over 60% Reduction In Hydraulic Plan Review for Water And Wastewater Systems
    12/1/2016

    Washington Suburban Sanitary Commission (WSSC) Development Services Group reviews hydraulic plans for approximately 160 proposed development plans per year. This includes water and sewer system extensions as well as approximately 172 small-site utility plans (commercial private systems) that connect to the existing water and sewer network in two large Maryland counties.

  5. ORP And pH — What You Don’t Know Can Hurt You
    11/15/2016

    When I look back at 2016 one of the most significant trends I observed was the growing acceptance of ORP measurements, especially for monitoring disinfection. With one caveat, the ORP value measured in a solution provides an unambiguous measure of the disinfection efficacy.

  6. United Water Solves Big Data Problem With Siemens Magnetic Flow Meter Technology
    11/15/2016

    United Water, a division of the global conglomerate Suez Environement, operates regulated water systems in eight states, and provides contract services to over five million people.

  7. Aqua+ Increases Plant Control System Design Speed By 50 Percent With Promis.e
    11/1/2016

    Khabarovsk Municipal Unitary Enterprise “Vodocanal” (Khabarovsk Vodocanal) provides water supply and sewerage facilities for the city of Khabarovsk in Russia’s Far East Federal District. As part of a program to shift from surface to underground water sources, Khabarovsk Vodocanal constructed the RUB 10 billion Tunguska Groundwater Intake Facilities to deliver 106,000 cubic meters per day (m3/d) of water to the city of Khabarovsk.

  8. Prolagos Designs Water Distribution System Delivering Energy Savings And Revenue Gains
    11/1/2016

    Prolagos, a subsidiary of Aegea Group, is responsible for providing water and sewerage services to five municipalities in Região dos Lagos, Rio de Janeiro. Prolagos manages a total water network encompassing 2,000 kilometers of distribution pipelines and accommodates for variable seasonal fluctuations ranging from 400,000 to almost 2 million inhabitants at the peak of the tourist season.

  9. Shanghai Investigation Sets BIM Standard On Ningbo Yongxin’s Urban Flood Control Project
    11/1/2016

    In response to the devastation from a 2013 typhoon that caused the Yongxin and Yongjiang rivers in Ningbo, China to overflow, Ningbo Raw Water Group Ltd. commissioned the detailed design and construction of a CNY 178 million emergency sluice pump. The pump would provide flood control measures and mitigate future flood losses to improve urban infrastructure services within the Zhejiang province. To avoid the risk of additional flooding from another typhoon, the Raw Water Group required the urban flood control project to be delivered in a demanding eight-month schedule—a process that would ordinarily take 24 months to complete.

  10. Ozone Vent Gas For Aeration At Wastewater Plant Expansion In China
    6/17/2016

    The Jimo, China, municipal wastewater plant was originally designed to treat a combination of municipal and textile wastewater (120,000 m3/d) with Class IB effluent limits for BOD, COD, ESS, TN, NH3-N and TP.