Wastewater Flow Control Measurement Videos

  1. Flow Meter Calibration 12/20/2018

    Specialized calibration of gas mass flow meters and flow switches is what Fluid Components International does best. FCI's calibration lab has 18 NIST traceable precision flow stands to ensure you are getting the gas mass flow meter or flow switch calibrated to it's actual published specifications to match your application needs.

  2. A Magmeter Built For "Ultra" Dependability And Performance 10/19/2018

    The Ultra Mag electromagnetic flow meter (or "magmeter") sets itself apart from the start, with a stainless steel body, steel flanges, and a consistent 3M fusion-bonded epoxy liner, inside and out, to eliminate wear, abrasions, and corrosion. 

  3. What Are The Hidden Costs Of Water? 10/16/2018

    There are a variety of costs that are easy to overlook in water treatment. But as Herman Coello, Products Manager for SIEMENS Process Instrumentation, explains in this Water Online video, accurately measuring your flow and treatment parameters can reduce them all. Much-overlooked expenses such as pumping inefficiencies and chemical overdosing can all be reduced to save operating expense.

  4. Signet Advantage 9/5/2018

    GF Signet promotional Magmeter flow sensors video featuring the Model 2551 with PP or PVDF wetted materials plus a choice of Hastelloy-C, titanium, or 316 stainless steel electrodes. The Model 2552 is fully designed with stainless steel, can be used for hot-tapping with easy one hand installation, and can be used in very large pipes.

  5. Siemens Reveals 3 Key Factors For Water Quality 10/18/2017

    Jack Roushey, product manager for instrumentation at Siemens, gives his take on trends in the water industry, including the three most important factors for ensuring a quality end product — safety, performance, and reliability within your process measurement and control regime. Talking to Water Online's Kevin Westerling, Roushey illuminates the impact of these important parameters with a discussion on lead in drinking water, which has recently caused contamination events, regulatory scrutiny, and a mandate for improved process control.

  6. SITRANS FS230 Video Installation Guide 4/24/2017

    The FS230 simplifies and optimizes your day-to-day operation with an unparalleled data update rate, superior user-friendliness and a leading variety of options for customization, securing the highest measurement quality at the lowest cost. Watch the video demonstration for an explanation of the three simple steps of installation.

  7. SITRANS F S: Digitize Your Productivity 4/24/2017

    Digital innovation. Unmatched noise immunity. The Siemens ultrasonic flowmeter solution, best-in-class performance and day-to-day operation for all liquids and pipe sizes. Watch the video for an overview of the SITRANS F S ultrasonic flowmeter product family.

  8. Using Magmeters In Zero Upstream And Zero Downstream Applications 4/24/2017

    Jack Roushey, Product Manager for Siemens electromagnetic flowmeters, presents on how to use magmeters in zero upstream and zero downstream applications. Based on their demonstrated ability to perform in non-ideal conditions, the SITRANS F M MAG 5100W and MAG 8000 electromagnetic sensors from Siemens have received approval for 2% accuracy custody transfer (MI-001) and non-custody transfer applications for installation with zero diameter upstream pipe and zero diameter downstream straight run pipe from the sensor.

  9. Aquis Day To Day Operation 3/30/2017

    Operating staff can benefit from using Aquis in their daily work. The operator gets a complete overview of pressure and flow parameters of the entire network. The user interface is intuitive and requires no previous knowledge of Aquis. The interface can be configured to suit the operator's specific needs and requirements.

  10. Aquis Water Quality 3/30/2017

    Aquis monitors and visualizes water quality covering parameters such as the age of the water, the direction and rate of flow and even the mixing of water from multiple sources. This enables the operator to choose the optimal combination of supply sources to achieve optimal water quality and optimizing production cost.