Sludge & Biosolids Processing Products

  1. Flygt Flush Valve 4901, 4910
    4/14/2015

    Automatic and continuous sump desludging. Flygt’s Flush Valve provides a simple, effective, and fully automatic way of continuously keeping pump sumps free of sludge by flushing the sump at the beginning of every pumping cycle. Sedimentation in the sump is greatly reduced, and unpleasant odors in and around the pumping station are virtually eliminated.

  2. Raketec Multiple Rake Screen
    2/26/2015

    Raketec is a multiple-rake bar screen system with no moving parts under grade level. It is a two-chain, free sprocket mechanism guarantying reliability and ease of use. A combination of stainless steel rakes, and durable brushes thoroughly cleans debris from the screen.

  3. Screentec Pump Station Bar Screen
    2/26/2015

    Screentec is a mechanical vertical bar screen that can be installed in many applications, including Headworks, Lift Stations, Deep Wells and Manholes. Due to its vertical design, Screentec can retrofit any kind of structure with minimal or no changes.

  4. Belt Filter Press Omega
    2/25/2015

    The Omega Belt Filter Press is designed for continuous mechanical dewatering of municipal and industrial sludge. Omega BFP's smart designs offer user-friendly operation, optimum space efficiency, and high operational efficiency ratios.

  5. Omega Gravity Belt Thickener
    2/25/2015

    The OMEGA Gravity Belt Thickener is designed for continuous mechanical thickening of municipal or industrial sludge.

  6. Compactec Washer Compactor
    2/24/2015

    Compactec is a washer/compactor that conveys, cleans, dewaters, and compresses debris. The shaftless screw conveys screened debris, while the spray bar system sends organic material back to the system. The compression box reduces the volume of debris, lowering transportation costs. Compactec can retrofit any kind of bar screen equipment.

  7. Drumtec Internally Fed Drum Screen
    2/24/2015

    Drumtec is an internally fed rotating drum screen built for heavy pretreatment applications such as draining, mud thickening, and sandy or industrial wastewater treatment. This product is highly recommended for membrane bioreactor (MBR) treatment plants.

  8. TWISTER® Low-Speed Aerator
    2/18/2015

    Long-lasting performance, and the highest oxygen-transfer rates of any mechanical aeration system on the market.

  9. CleanFlo™ Monoscreen® Fine Screen
    1/9/2015

    The WesTech CleanFlo™ Monoscreen® is a highly efficient, self-cleaning fine screen that is being used in a wide variety of wastewater and process water treatment applications. Utilizing a reliable blade and drive system, the Monoscreen creates a progressive step motion that allows the screenings to be evenly distributed while minimizing water level surges.The result is a screenings capture ratio of 82.5 percent.When matched with WesTech’s CleanWash™ SWP/CPS dewatering unit, the combination maximizes the solids capture rate for almost any headworks operation while minimizing the amount of solids for disposal.

  10. OxyStream™ Oxidation Ditch
    1/8/2015

    The OxyStream™ Oxidation Ditch from WesTech Engineering has proven to be the ideal equipment for biological wastewater treatment applications throughout the world. It combines vertically mounted, low-speed surface aerators with an oxidation ditch design to maximize oxygen transfer efficiency while maintaining the greatest flexibility for power turndown. In addition, the OxyStream™ has greater side water depths and fewer required aerators than a conventional brush rotor or disc rotor oxidation ditch. The vertical slow-speed surface aerator eliminates maintenance-prone horizontal shafts, pillow block bearings, and drive units near the water surface. Above all, the OxyStream™ Oxidation Ditch provides energy savings and produces predictable, high-quality effluent.