Produced Water Treatment Solutions

  1. PetroSorb™ Activated Carbons For Oil And Gas Processing 12/17/2013

    As refinery operations are forced to generate more product output from marginal raw material sources with aging equipment, the requirement to maintain an acceptable quality of processing chemicals becomes more difficult. Activated carbon used in a fixed bed can continuously treat process chemicals, either in full or in a partial treatment stream to restore their properties in line with virgin product. This greatly enhances the economy of the production process and permits the conversion of more heavily contaminated resources that were previously difficult to exploit.

  2. SmartMOD®: Advanced Modularized Evaporation System For Oil Sands 2/21/2013

    Aquatech has been providing integrated water treatment solutions to the oil and gas industry for more than 30 years, ensuring our customers’ production and refining processes operate in an efficient and safe manner.

  3. Measurement Instrumentation In Produced Water Treatment 1/28/2013

    Every drop costs you money The estimated cost associated with produced water treatment in the United States is approximately $18B. The cost of cleaning produced water is 300 times greater than municipal waste water and 3,000 times greater than irrigation water.

  4. The ROSS™ - System Ceramic Membrane-Based Produced Water Treatment 7/16/2012

    Veolia's ROSS Technology generates high-quality water suitable for fracking operations with high system recovery rates that minimize liquid waste generated.

  5. Produced Water Filtration – Spectrum™ Plus Filtration 5/14/2012

    Spectrum™ Plus Filtration is a nutshell filter that has the unique ability to remove oil and suspended solids to much lower levels than can be achieved by conventional nutshell media filters.

  6. Power Clean® Nutshell Filters 1/24/2012

    Power Clean® are the most effective, quickest regenerating nutshell filter media system available.

  7. OPUS® II Technology - a New Innovation for High Recovery of Water for Reuse 4/21/2011

    OPUS® II is a proprietary process for high recovery of complex wastewater streams. This new innovation uses CeraMem® ceramic membranes as pretreatment for reverse osmosis to reduce the system footprint. OPUS II can be delivered in modular, containerized units to minimize installation costs.

    Like the original OPUS technology, OPUS II effectively removes silica, organics, hardness, boron, strontium and particulates. It generates high quality effluent at a high recovery rate, providing clean water for discharge, recycle or reuse.

  8. MoTreat: Mobile Water Pre-Treatment System 4/20/2011
    MoTreat provides a mobile solution to treat flowback and produced water on-site at the well pad area to yield water with minimal total suspended solids (TSS) which enables recycle and reuse without the need for costly trucking to off-site treatment facilities.
  9. Water Management Solutions For Unconventional Gas 4/13/2011

    Based in Pennsylvania, Aquatech is strategically located within the Marcellus Shale region. This enables us to leverage local and immediate knowledge of shale gas applications as it pertains to water, that gas companies can benefit from.

  10. Produced Water Recovery At Seneca Resources Using Short Bed Ion Exchange 1/19/2011
    As a result of water restrictions in the Bakersfield, CA area, Seneca Resources has installed a new produced water recovery system. This paper reviews this process, which consists of water knock out and clarification tanks, an IGF unit, a specialized nutshell filter, and a short bed ion exchange softener that is regenerated with salt. By Lewis Krause, Michael Sheedy, Eco-Tec Inc. and Keith Jones, Seneca Resources