Containerized seawater desalination solutions ensure water availability in a wide range of applications.
The revolutionary new ClorTec® SCT is a fully integrated patent pending design from De Nora Water Technologies. Salt, water and electricity are electrolyzed to produce up to 4.4 lb/day (2 kg/day) chlorine equivalent of hypochlorite solution at 0.7% strength. The system offers superior health and safety benefits for employees on site due to its innovative design.
Annual filter inspections are a key component to long term, trouble free filter operation. Loprest’s trained service engineers can inspect your treatment system and provide written recommendations for maintenance, improvements and upgrades to keep your filter system operating at its peak performance.
For more than seventy years, the Henry Pratt Company has provided superior quality valves for pump control applications. Our ball valves are designed to meet or exceed AWWA C507 standards. Pratt ball valves have been tested at 300 psi differential for 10,000 cycles per AWWA C-507, Section 5.2.4.3, proof-of-design requirements and tested bubble-tight at the conclusion of the cycle tests. Ball valves have also been tested to prove their resistance to the effects of cavitation. After several free discharge cycles at 200 psi pressure, a test valve was subjected to a 100 hour continuous cavitation test at 95 psi differential pressure and a valve angle of 25 degrees. Line velocities in excess of 70 feet/second and localized velocities across the seat in excess of 100 feet/second were attained during the tests. At the conclusion of the tests, the valve was bubble-tight at 300 psi.
AdEdge-ROTEC’s Flow Reversal technology is designed to be implemented in new and existing reverse osmosis desalination facilities for water purification, brackish water, process water, and other industrial applications. This high recovery technology addresses concerns often associated with desalination and enables significant system performance improvements, leading to higher profitability, reduced operating costs, and a lower environmental impact.
ClorTec T systems easily control sodium hypochlorite production and provide a powerful disinfection method for any application. T systems meet requirements for 2 to 36 lb/day (0.9 to 16 kg/day) chlorine equivalent. Applications include potable water, wastewater, odor and corrosion control, cooling towers, oxidation and swimming pool disinfection.
The Signet 4630 Chlorine Analyzer System is an integrated all-in-one system designed to measure free chlorine.
Radar Level Meter for distance, level and volume of liquids, pastes and solids.
The Kruger ACTIFLO® MEM process combines a high-rate clarification system followed by an ultrafiltration membrane system, therefore assuming system-wide responsibility for pretreatment and membrane.
Protecting coastal cities through accurate flood prevention solutions.
|
|
|
|
|
|
|
|
|