Drinking Water Distribution Products

  1. LeakFinder-ST: Advanced Acoustic Leak Detection System
    1/12/2018

    Echologics is globally recognized as a leader in non-invasive leak detection technology.  Echologics’ flagship LeakFinder-ST correlator is a result of extensive research as well as the input from global leak detection experts on the user interface and design of equipment to meet the needs of end user.

  2. 3G Mobile™ AMR Solution
    8/6/2013

    The 3G Mobile AMR solution provides most every benefit associated with fixed network — without the infrastructure — in a convenient cost-effective package.

  3. accuSTREAM™ Water Meter
    2/27/2018

    Positive displacement water meter with Sensus® Electronic Register+™.

    Sensus accuSTREAM meters consist of three basic components: maincase, measuring chamber and sealed register. Maincases (including the bottom plate) are made of composite material with externally-threaded spuds. Registers are housed in a bonnet of synthetic polymer. Measuring chambers are of Rocksyn®, a corrosion-resistant, tailored thermoplastic material formulated for long-term performance and especially suitable for aggressive water conditions. The accuSTREAM can be installed horizontally.

  4. Aclara RF Network 3400 Water MTU
    11/6/2018

    The new 3400 On-Demand Meter Transmission Unit (MTU) for water uses the efficient, low-power, high performance two-way Aclara RF Network technology to transmit hourly, interval usage data to the utility. The MTU supports up to nine-digit registers and delivers time-stamped reads on a time-synchronized network, allowing for advanced water distribution management. Enhanced features such as on-demand reads, firmware over the air, on-board storage of readings, market leading security,meter-generated alarms and flags and remote shut-off valve control bring market-leading AMI capabilities to the Aclara RF Network.

  5. RTP Tanks Repair Services
    8/23/2004

    Plas-Tanks Industries offers the following services for fiberglass reinforced plastic (FRP) tanks

  6. Eureka3+
    4/5/2018

    A user-friendly real-time acoustic noise correlator with a high-definition touch color LCD screen and advanced filtering system to unmask even the most difficult leaks.

  7. JCM 414 Fabricated Mechanical Joint Tapping Sleeve
    6/11/2018

    This tapping sleeve combines the high strength and versatility of fabricated steel with the traditional side and end gasketed mechanical joint design.

  8. E-Series® Ultrasonic Plus
    10/12/2016

    The E-Series® Ultrasonic Plus with integrated shutoff valve has a patented flow restriction valve that supports open, closed and partial closed settings. It's permanent seal maximizes field life through a patent pending magnetic coupled valve. With a flexible, modular design, you can install the meter now and install the valve in the field later. The valve actuation and management is controlled through BEACON® AMA software. 

  9. Remote Pressure Monitoring System
    6/23/2014

    Several years ago, Mueller began a journey to develop a user friendly and cost-effective technology to continuously and remotely monitor pressure at any point within a potable water distribution system. The technology involves threading a sensor onto a corporation valve to transmit pressure readings. The pressure sensor, typically installed two (2) per District Metering Area (DMA), reports at user-defined intervals via cellular service and a Mueller-hosted secure web server. Beginning with pressure monitoring, Mueller has created a communications backbone that utilities can integrate into its monitoring systems or use as a stand-alone monitoring platform. This technology is currently available in North America.

  10. OMNI™ Verification (V²) Portable Test Meter
    4/28/2017

    The Sensus OMNI™ Verification (V²) portable test meter gives you a fast and efficient solution to test the accuracy and performance of your large meters. The test meter will quickly become an important part of your water system’s maintenance operation. Piping and flow pattern irregularities can influence your meters’ accuracy and testing them in-line provides a truer indication of in-service accuracy. With OMNI V² you no longer have to take your meters out of service to test them.