Daniel Theobald Articles

1. Math Solutions Explained: Calculate Food-to-Microorganism (F-M) Ratio 3/15/2022

   The food-to-microorganism (F-M) ratio is a process control numeric value advantageous to determine the proper number of microorganisms for the biological treatment process. The solution of calculating F-M ratio uses the influent volume of wastewater into an activated sludge system (flow MGD), incoming carbonaceous biochemical oxygen demand (CBOD) (mg/L) concentration into the aeration tank, mixed liquor volatile suspended solids (MLVSS) concentration (mg/L), and quantity (in gallons) of the respective aeration system.

2. Math Solutions Explained: Converting To Gallons Per Minute 9/23/2021

   This presentation will focus on converting and expressing flow rate gallons in minutes, converted from flow rate gallons in hours.

3. Math Solutions Explained: Biochemical Oxygen Demand (BOD) mg/L 8/23/2021

   Water Online’s “Math Solutions Explained” series, presented by wastewater consultant and trainer Dan Theobald (“Wastewater Dan”), educates operators by explaining BOD mg/L calculations.

4. Math Solutions Explained: Pipe Volume Gallons 8/3/2021

   Water Online’s “Math Solutions Explained” series, presented by wastewater consultant and trainer Dan Theobald (“Wastewater Dan”), educates operators by explaining pipe volume gallons calculations.

5. Benefits Of Remote Access To Primary Wastewater Treatment 7/12/2018

   A real-world, industrial application of remote process monitoring proves that a little technology can go a long way in terms of cost savings and process improvement.

6. Math Solutions: 10 Most Popular Step-By-Step Procedure Calculation Videos Of 2017 1/10/2018

   With almost 30,000 total views in 2017, the “Math Solutions” series of tutorial videos from wastewater consultant and trainer Dan Theobald ("Wastewater Dan") has offered plenty of guidance to treatment plant operators. Here are the lessons that drew the most attention.

7. Math Solutions: Flow Velocity Calculations 5/2/2017

   Flow velocity is defined in fluid dynamics as the specific distance (feet, yards, or miles) fluids such as water and wastewater travel in an exact period of time including seconds, minutes, or hours. In managing your water/wastewater, applying this tool can be very useful.

8. Math Solutions: Helpful Math Hints And Calculations 3/28/2017

   Mathematical calculations can be a challenge for even the most skilled water and wastewater operator. The formulas for chemical dosing, conversion, filtration, pounds, velocity, volume, and other everyday problems vary, of course, but there are a scant number of basic ground rules that can help make sure your math solution is legitimate regardless of the calculation you’re performing.

9. Math Solutions: Certification Examination Prep Calculations 2/15/2017

   While it is natural to be worried about the unknown, being apprehensive can lead to less achievement. Conversely, knowing what to expect more likely leads to relaxation and accomplishment — and can ultimately help you pass the exam.

10. Math Solutions: Energy Dollar Savings Calculations 1/6/2017

    Energy efficiency, as defined in wastewater treatment, is using less energy to provide the same service. It can be expressed as energy dollar savings by replacing older, inefficient motors.