Drinking Water Disinfection PRODUCTS

1. NeoTech D228™ 4/16/2014

   The NeoTech D228™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

2. Constant Chlor® MC5 Feeder 1/11/2021

   The Constant Chlor® MC5 Feeder system provides reliable chlorine solutions for water treatment plants, waste water plants and water reclamation facilities. The Constant Chlor® system consistently delivers liquid available chlorine for disinfection applications that kills bacteria, controls algae and removes organic contaminants. The feeders use EPA registered Constant Chlor® Briquettes that work in conjunction with the feeder to produce a fresh concentrated liquid chlorine solution for clean, clear, sanitized water. Treats facilities with up to 10 MGD ranging from a minimum of 5 lbs a day available chlorine to 83 lbs a day available chlorine.

3. Ion Exchange Systems 10/15/2018

   Loprest has been providing ion exchange treatment systems for the removal of arsenic, nitrate, perchlorate, hardness, fluoride and other contaminants for many decades. 

    

4. Ion Exchange 7/29/2016

   Ion exchange, often abbreviated IX, is an effective technology for removing dissolved ionic compounds
   from liquid solutions, primarily drinking water sources. IX is most commonly known for removing nitrate but is also
   effective at removing contaminants such as perchlorate, arsenic, Chrome-6, and more recently, PFAS (Per- and
   Polyfluorinated Substances).

5. Next Gen Capital Controls® Chlorinators 3/7/2018

   The unique compact design incorporates the best existing Capital Controls® technology with exciting new features. With just three models ranging from 10-10,000 lbs/day capacity, each chlorinator is available with automatic or manual feed and a 10” flowmeter for an easier read. Sonic operation on the 4100 model eliminates the need for a differential pressure regulator. On all automatic models, an additional controller isn’t needed, reducing components – and costs. 

6. Wallace & Tiernan® Analyzers and Controllers 12/16/2014

   Wallace & Tiernan MFC analyzer/controller offers a broad combination of drinking water analysis and disinfection/chemical control in a single unit.The MFC analyzer/controller offers an easy, software selectable range of control modes from flow proportional, residual control only, compound loop and set point trim enabling precise control of a chlorinator or metering pump to maintain the desired level of disinfection and water quality.

7. ClorTec® DN On-Site Sodium Hypochlorite Generators 10/6/2015

   The latest generation of brine electrochlorination technology, the ClorTec DN range, offers simple operation and maintenance as well as unrivalled safety advantages.

8. Ceramic Membrane Filtration System 7/17/2015

   The "Ceramic Membrane Filtration System" is a reliable technology to produce clean water by removing the turbidity, bacteria, and cryptosporidium and other protozoa contained in raw water sources such as surface water and ground water. Using a unique ceramic membrane as a filter, this system is a low cost and long life filtration system. Therefore it can enable a water supply system to meet recent demands for safe and tasty water.

9. LuminUltra Cloud 5/26/2017

   With LuminUltra Cloud’s Data Management and Decision Support Platform you’ll be in control of your next decision - with access to ATP and other water quality data.

10. Aqua ElectrOzone Ozone Generation System 7/13/2016

    Ozone treatment for water and wastewater has been utilized successfully for several decades and continues to be a viable disinfection solution for both municipal and industrial plants, worldwide.