Drinking Water Analysis Application Notes

  1. A Comparative Study Of On-Line And Laboratory TOC Analyzers For Analysis Of Raw And Finished Drinking Water
    4/5/2013

    Total organic carbon (TOC) analysis is an important indicator of water quality throughout the drinking water treatment process. Raw source water is progressively treated in chemical coagulation, flocculation, sedimentation, and filtration steps to remove particulate matter and natural organic matter (NOM).

  2. The Basics: ORP and Free Chlorine Monitoring
    5/13/2014

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

  3. Advances In Paper-Based Devices For Water Quality Analysis
    2/22/2017

    Water quality test strips have been around for decades. They are usually constructed from a porous media, including different types of paper, and undergo a color change when dipped into water containing the analyte of interest. These test strips have seen application in swimming pools, aquariums, hot tubs, remediation sites, and other commercial/environmental areas.

  4. Disinfection In Drinking Water: Choosing The Right Chlorine Analyzer For Your Application
    4/13/2017

    Disinfection is a very important part of the drinking water treatment process, and choosing between an amperometric and colorimetric chlorine analyser is a decision that depends on a variety of factors. Below you will find out why a colorimetric analyser was the right choice for our customer, given their specific situation.

  5. The Basics: Testing RO Quality
    4/28/2014

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached.

  6. Application Note: Employing Best Water Quality Monitoring Practices To Reduce Runoff During Construction
    8/4/2011
    Under proposed EPA stormwater runoff guidelines, construction site operators will be required to actively monitor or sample stormwater discharges daily. The enhanced effluent rules take effect in August 2011 for construction sites that disturb 20 or more acres and February 2014 for sites that disturb 10 or more acres, and they may stipulate a strict numerical limit of less than 280 NTU for average turbidity (sediment in water) on any day. By YSI
  7. Analysis Of Pesticide Residue In Spinach Using The AutoMate-Q40 An Automated QuEChERS Solution
    10/16/2014

    QuEChERS is a Quick-Easy-Cheap-Effective-Rugged-Safe extraction method that has been developed for the determination of pesticide residues in agricultural commodities.

  8. Determination Of EN15662:2008 - Determination Of Pesticide Residue In Food Of Plant Origin, By An Automated QuEChERS Solution
    9/24/2014

    Pesticide residue laboratories are required to undertake analyses of an ever increasing number of samples. The analyses typically involve use of multi-residue methods (both GC-MS and LC-MS) to test for over 500 pesticide residues.

  9. Application Note: Water Flows From The Golden Hills Of California
    1/20/2010
    Each morning John Johnson drives the few miles from his smalltown home in northern California to the Center at Pardee Reservoir. Nestled among the foothills of the Sierra Nevada mountain range, the reservoir is a long 100 miles away from San Francisco Bay. By YSI
  10. Determination Of Pesticide Residues In Honey, By An Automated QuEChERS Solution
    9/17/2014

    The QuEChERS (Quick-Easy-Cheap-Effective-Rugged-Safe) sample extraction method was developed for the determination of pesticide residues in agricultural commodities.