Integrity Municipal Systems, LLC (IMS) is a specialty engineering company devoted to the design and supply of innovative, pre-assembled, process solutions for the water and wastewater industry. With more than 25 years of systems engineering innovation and project execution experience, the IMS team has the knowledge and dedication to tackle your odor control and chemical feed needs. IMS has achieved a reputation for producing unique, practical, and cost-effective solutions for our customers. We are committed to providing quality, service, and overall value that exceed your expectations.
|Integrity Municipal Systems Corporate Brochure|
Integrity Municipal Systems, LLC (IMS)
13135 Danielson St., Suite 204
Poway, CA 92064
Phone: (858) 486-1620
Santa Margarita Water District (SMWD) is the second largest water district in Orange County, California, providing water and wastewater services to more than 155,000 residents and commercial enterprises. When a new housing development was planned adjacent to SMWD’s 9.0 MGD Chiquita Water Reclamation Plant, the District initiated plans for enhanced odor control solutions. District staff identified the primary process area (grit removal and primary clarifiers) as a significant contributor to odor emissions.
After decades in service, the wet well at the Laguna Southwest Orange County Wastewater Authority (SOCWA) lift station became dilapidated. The project included a hybrid manhole/junction structure that would also serve as the bypass wet well during the rehabilitation work. Upon completion of the wet well rehabilitation, the temporary sewage bypass pumping system was removed and normal lift station operation was restored.
As a bulk emergency chlorine vapor scrubber system approached the end of its anticipated 20-year useful life, the city engaged Integrity Municipal Systems, LLC (IMS) inspected the equipment and proposed a system refurbishment plan that would ensure proper system performance and safe storage of the 30,000 gallons of corrosive caustic soda contained within it.
The West African City of Abidjan in Côte d’Ivoire has historically provided drinking water to its five million residents from water treatment plants that use hydrated lime systems. But because of the high content of carbon dioxide in the local groundwater, up to 160 ppm, setting the water to calcium carbonate equilibrium using hydrated lime was economically, operationally and environmentally challenging for the city of Abidjan.
The Albert R. Davis Water Treatment Plant (WTP) in Austin, Texas, is one of three water treatment plants supplying drinking water to the greater Austin metropolitan area. The plant was built in 1954 and has had multiple upgrades over the years, increasing its capacity to 118 million gallons per day (MGD).
The Topeka Water Treatment Plant (WTP) — a 60 million gallon per day facility - serves Topeka, Kansas and surrounding areas. Built in 1945, the plant underwent several renovations with the most recent upgrading the plant to its current capacity in 1993.
In 2015, plant officials decided to replace the first of the existing slakers and, after considering offers from several slaker suppliers, chose the A-758 PLUS™ paste-type lime slaker manufactured by Integrity Municipal Systems, LLC (IMS). Read the full case study to learn more.
Olayan Voltas Contracting Company was awarded the 2013 “Sustainable GCC Project-of-the-Year” by MEP Middle East magazine for the utility complex at Al Bustan Village, a brand new residential community north of Riyadh, Saudi Arabia.
Read the full case study to learn how the County of Maui Department of Water and IMS determined that spent caustic used at the local wastewater treatment plant and the acid wash solution generated during the cleaning process could be neutralized on-site and disposed through the local wastewater treatment system.
In December 2006, Integrity Municipal Services (IMS) was contacted by the City of California City Plant Manager Greg Fielding to perform an inspection of their RJ-2000® emergency chlorine vapor scrubber system.
The MNI Wiconi Water Treatment Plant in Ft. Pierre, SD was built for the Oglala Sioux Rural Water Supply System between 1997 and 2002 with a grant provided by the U.S. Department of Interior.
In 2014, bids were solicited to design, supply, install, and commission two Emergency Chlorine Scrubber Systems at the La Mesa Treatment Plants 1 and 2 in Quezon City, Philippines.
Since opening in 1930, the Bachman Water Treatment Plant in Dallas has increased its processing capacity from 30 million gallons per day to 150 million gallons per day, with the latest upgrade in 2007.
In October 2014, Eastern Municipal Water District (EMWD) selected IMS to clean, inspect, and restore four Bulk Emergency Chlorine Vapor Scrubber Systems.
The Integrity Municipal Services (IMS) team successfully cleaned and reconditioned an emergency chlorine vapor scrubber in Cheyenne, WY and did so while providing substantial savings to the City of Cheyenne, Board of Public Utilities (BOPU).
Three Valleys Municipal Water District (Three Valleys) is one of 26 water agencies that comprise the Metropolitan Water District of Southern California (MWD). Three Valleys is the primary source of supplemental water for the Pomona, Walnut, and East San Gabriel Valleys.
Integrity Municipal Systems, LLC is pleased to announce the launch of their newest product, the liquid ammonium sulfate (LAS) feed system.
The I-BOx® Biological Odor Control System (patent pending) uses a two-stage process with a biological stage to remove 99% of the hydrogen sulfide (H2S), followed by an activated carbon polishing stage to remove residual H2S and organic odors. Standard models are available to treat up to 5,000 cfm (8500 m3/h) of odorous air.
The IMS Fluoride Feed System is designed with separate saturator and solution tanks to ensure complete saturation, high reliability, low maintenance, and ease of use. Systems are sized to meet customer requirements.
The MCS odor control systems are single stage, skid-mounted, dry media systems, designed for relatively lower odor levels and organic odors. The media may be virgin activated carbon or any of a number of specialty catalytic carbon media. Standard models are available to treat up to 1,400 cfm (2400 m3/h) of odorous air.
The IMS Lime Slaker Systems provide continuous high volume lime slurries (up to 8,000 lbs/hour) for industrial and municipal process pH adjustment, flocculation, and chemical reaction. The superior paste-type slaking technology consistently produces a higher strength and more reactive lime slurry resulting in more efficient and more economical use of the quicklime. Systems are factory assembled and tested for quick and easy installation, and include options for lime feed and grit removal.