04.23.26 -- 7 Takeaways From Water Week; World Bank Initiative Tackles Water Security

ResinTech ASM-10-HP is a strongly basic hybrid anion exchange resin specially formulated to selectively remove arsenic.

There are many different joints that can be found on waterworks pipeline components. This paper focuses on the three most common joints.

Diaphragm pumps remain a versatile solution for chemical dosing, offering reliable performance across a wide range of applications — especially when matched correctly to flow, pressure, and chemical characteristics.

In this white paper, we will drill down into which technology has particularly proven itself in terms of energy efficiency in the water industry.

Critical safety systems must remain operational during repairs. Advanced insertion technology enables the installation of permanent valves on pressurized lines without service interruptions, preventing costly facility shutdowns while ensuring constant fire suppression readiness.

In this case study, read about AV's unique Concept to Commission approach which enabled a team to design, manufacture, and install GAC systems and interconnecting site pipe in just 10 working hours. 

Because the WWTP is a heavy energy consumer, the increasing cost of electrical energy helped refocus operations on improving efficiencies and what latent energy could be extracted from the waste stream. In particular, what could be extracted and put to use in the facility itself?

Read about new mixers installed for Anglian Water that have delivered over and above estimated energy savings and had minimal disruption to the plant. 

The need for nitrogen-reducing wastewater treatment systems has become more common in the past few decades due to various environmental concerns, including eutrophication, oxygen depletion, and toxicity to aquatic organisms in lakes and streams.

When the Otay River Pump Station had a floating blanket of grease problem, they turned to the Vaughan Chopper Pump to help eliminate it — while also being a cost-effective solution.

A DWTP client in Alaska detected elevated PFAS contamination levels in two groundwater wells supplying drinking water to 85 service connections. PFAS concentrations are provided in Table 1, where combined concentration of EPA PFAS6 was detected at 490 to 810 ppt.

Columbia Water Center says that while many industries rely on water for operating processes, water is a particularly crucial component of the mining industry. Many mining customers are faced with challenges that include increasing water maintenance costs.

Proprietary composite spiral element, available in fiberglass and netting-wrap configurations, with anti-telescoping device (ATD) at both ends and brine seal on one end.