AquaPRS™ PFAS Removal System: Higher Effluent Quality In A Completely Automated Process

Higher Effluent Quality in a Completely Automated Process

Aqua-Aerobic Systems, Inc. is pleased to introduce the first in our line of PFAS Solutions, the AquaPRS™ PFAS Removal System. This system utilizes a unique sorbent suspension to adsorb pre- and polyfluoroalkyl substances (PFAS) and a robust separator to produce clean water from the suspension. The suspended adsorbent slurry prevents biofouling and controls solids and mineral buildup. Additionally, the adsorbent material is specially engineered to adsorb much more PFAS (ug of PFAS/g of sorbent) than can be adsorbed by the same amount of GAC,  ion-exchange resins, or other adsorbents, resulting in significantly less operating life cycle costs and net present value.

Some of its features and advantages include:

• Extremely high sorbent adsorption rates of PFAS compared to other sorbents
• Fouling and scaling controlled by slurred adsorbent
• Waste volumes are substantially lower when compared to

GAC or IX Resin

• Enhanced removal of short-chain PFAS in a single process
• Process is completely automated, including adsorbent replacement

The process is completely automated, including replacement of the adsorbent. The removal process allows parameter adjustments in response to varying influent concentrations of PFAS, if necessary. Single stage operation removes PFAS/PFOA and other regulated PFAS contaminants to levels below EPA standards with low to moderate influent levels.

For very high PFAS concentrations (1,000+ ng/L of PFAS) or difficult influent water characteristics, a two-stage configuration / operation can achieve effluent levels to meet EPA effluent standards.

Aqua-Aerobic Systems has been a leader in the design and manufacture of wastewater treatment equipment and systems for both industrial and municipal markets, worldwide, since 1969. Its treatment solutions include aeration/mixing, biological processes, cloth media filtration, membranes, PFAS removal, ozone systems, process control and aftermarket products.  The company’s technologies meet or exceed the most stringent effluent requirements of today and are designed to accommodate changing effluent demands of tomorrow.