Water Instrumentation Application Notes

  1. WATERFLUX 3050 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX 3050 is an electromagnetic flowmeter (EMF) for basic water applications. It offers cost-effective flow measurement in applications where extremely high accuracy, extensive diagnostics or a wide range of digital communication options are not a priority. Its measuring tube with a rectangular and reduced cross-section enables a stable measurement even at low flow rates. Due to the optimized flow profile, the meter is practically independent of interferences from the installation environment. It can be installed virtually anywhere without straight inlet or outlet runs – behind pipe bends, slide valves or a reduction in the pipe.

  2. Capital Controls Series 480 Vacuum Gas Feeders 10/8/2015

    The Capital Controls Series 480 all-vacuum gas feeder is designed for direct mounting to a 150 pound gas cylinder or ton container. It is a basic alternative for those applications requiring a chlorine feed rate of 250 PPD (5 kg/h) or less. 

  3. OPTIMASS 1400 Coriolis Mass Flowmeter 9/16/2019

    The OPTIMASS 1400 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of standard applications with gases and liquids (up to 170,000 kg/h or 6,235 lb/min). The meter features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature – even at difficult process conditions with 2-phase flow.

  4. Active Energy Control – Energy Reductions Of Up To 10% Above Standard Drives 4/1/2017

    Energy costs continue to increase. At the same time, there is increased pressure to reduce utility bills without sacrificing operations or comfort.

  5. ABB Ability™ Symphony® Plus For Water And Wastewater 8/2/2018

    The new generation of ABB’s total plant automation: DCS and SCADA for the power and water industries.

  6. New Certified Reference Materials Ready-To-Use For Water And Wastewater Analysis 4/2/2018

    Experience absolute precision with our ready-to-use diluted certified reference materials (CRMs). Thanks to their exact concentrations, expanded measurement uncertainty, and direct traceability to NIST primary reference materials, our CRMs ensure that your results are correct and comparable worldwide.

  7. Best-In-Class Solution For Straightforward Flow Measurement: SITRANS FS220 4/27/2023

    The tried-and-trusted SITRANS FST020 transmitter has been upgraded to deliver enhanced performance, user friendliness and options for customization.

  8. Liquid Analyzer For Turbidity And Chlorine FLXA402T 12/28/2023

    The FLXA402T offers multiple connection possibilities, eliminating the need for multiple analyzers and providing greater flexibility. 

  9. ExactSteam V-Cone Flowmeter 3/16/2017

    McCrometer’s ExactSteam V-Cone System is a complete flowmeter for steam metering, factory configured for energy metering or mass flow. The meter accurately measures steam across the entire range with technology-leading low flow cut off.

  10. WATERFLUX 3100 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX 3100 is an electromagnetic flowmeter (EMF) for all standard applications with raw, potable or abstraction water. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX 3100 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.