Water Instrumentation Application Notes

  1. Water Determination In Liquefied Petroleum Gas Using GC BID And Ionic Liquid Column Watercol™ 6/28/2018

    Water in petrochemical feedstocks can cause problems for processors. Freezing of pipe lines and valves and poisoning of expensive catalysts are just a few examples.

  2. OPTIMASS 2400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis meter features Entrained Gas Management (EGMTM) for liquid applications, maintaining operation over a wide range of gas fractions and complex flow conditions. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase flow.

  3. TROLL 9500 Water Quality Instrument 10/24/2011
    The U.S. EPA has granted nationwide approval to three In-Situ RDO optical DO methods under the Alternate Test Procedure(ATP) process.
  4. Centrifugal; Submersible Chopper Pumps 12/6/2005

    The Vaughan E-Series Submersible centrifugal chopper pump is applicable in all deep sump applications where ceiling height or visibility is an issue. The E-Series design allows complete external adjustment of all cutter clearances.

  5. Magnetic Flow Meters 11/20/2015

    Interchangeable sensors and transmitters provide ideal flexibility for flow measurement.

  6. Amaprop – Submersible Mixers For Biogas Applications 4/9/2013

    Wear resistant with double-safety bi-directional mechanical seals and temperature sensors that monitor any heat buildup in the motor. 

  7. Service, Training and Rentals 12/14/2015

    Siemens Process Instrumentation Service group provides a highly-skilled staff of competent, trained engineers and specialists to provide service and support.

  8. ABB Ability™ Symphony® Plus For Water And Wastewater 8/2/2018

    The new generation of ABB’s total plant automation: DCS and SCADA for the power and water industries.

  9. OPTIMASS 1400 Coriolis Mass Flowmeter 9/16/2019

    The OPTIMASS 1400 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of standard applications with gases and liquids (up to 170,000 kg/h or 6,235 lb/min). The meter features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature – even at difficult process conditions with 2-phase flow.

  10. WATERFLUX 3100 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX 3100 is an electromagnetic flowmeter (EMF) for all standard applications with raw, potable or abstraction water. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX 3100 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.