Water Instrumentation Application Notes

  1. Take Control Of Your Water Distribution Network With Digitalization And Remote Monitoring 5/19/2022

    Any process plant constantly generates a high volume of status data. Today, this data can be extracted from the plant, stored, analyzed, and prepared to meet operator needs and lower marginal costs.

  2. Reduced Bore Electromagnetic Flowmeter 10/29/2021

    Being able to accurately measure both the quantity and rate of water passing through a water distribution system is crucial to gain an informed understanding of overall efficiency. As such, achieving a measurement that is exact as possible can have a significant impact on key areas. This includes supply planning, maintenance, resource deployment, leakage detection and the overall environment.

  3. SITRANS LT500 MultiRanger/HydroRanger 11/14/2024

    SITRANS LT500 is the next evolution of digital level, flow, and pump controllers for radar and ultrasonic transmitters – or any 2-wire 4-20 mA device. It is the first choice for radar sensor measurements at 80 GHz and features single and dual point measurements, 6 relays, and Modbus RTU, HART, PROFIBUS DP, PROFIBUS PA, PROFINET.

  4. Preliminary Assessment Of Water Quality In Riviera Grise Near Port-Au-Prince, Haiti 10/17/2012

    The Riviera Grise drains water from the Cul-de-Sac watershed, Haiti, which covers most of the rural areas along the flood plains and areas that extend into steep hillsides. It also covers urban areas of Port-Au-Prince, the capital city of Haiti.

  5. ReliaSource 7x10 Above-Ground Lift Stations 12/19/2022

    This packaged sewage lift station accommodates a variety of pump sizes and offers a range of capacities to meet your specific heavy solids-handling requirements.

  6. Phosphax sc Phosphate Analyzer 5/14/2024

    The PHOSPHAX sc Phosphate Analyzer is environmentally controlled for rugged, outdoor installations, provides a wide measurement range for a variety of wastewater and drinking water applications (e.g. in the activated sludge basin, for phosphate elimination and my more), and comes with the fully featured "Plug & Play" digital controller. 

  7. PGC5000 Gas Chromatograph Oven With Integrated Controller 8/6/2018

    Shelter space and the overall initial investment in analytical equipment can be expensive. The PGC5000 oven with an integrated controller offers a low initial investment solution by integrating the single board computer (SBC) directly into the PGC5000B or PGC5000C gas chromatograph ovens.

  8. OPTIMASS 6400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 6400 is the standard high performance Coriolis mass flowmeter for the process industry. The twin bent tube meter offers superior performance and high accuracy in virtually any application: From process control in (petro)chemical applications to concentration measurements in the food and beverage industry to custody transfer filling and transport measurements in the oil and gas industry. Its high-end options also make the OPTIMASS 6400 the optimum device for cryogenic media like Liquefied Natural Gas (LNG) with temperatures down to -200°C / -328°F as well as applications involving high operating temperatures (up to 400°C / 752°F) or pressures (up to 200 barg / 2900 psig).

  9. Enhancing Clean-In-Place (CIP) Systems With Pulsafeeder's NextStep Pump Technology 1/15/2026

    Clean-in-Place (CIP) systems are critical for industries where hygiene and contamination control are mandatory—such as food and beverage, pharmaceuticals, and specialty chemical manufacturing. These systems automate cleaning through validated, programmed steps that ensure compliance with stringent safety and quality standards. This application note explores the challenges of CIP operations and demonstrates how Pulsafeeder’s NextStep pump technology addresses these challenges with precision, reliability, and cost efficiency.

  10. 'TOTEX' Is Key When Purchasing Instrumentation 4/29/2021

    There’s a lot to be considered in the price tag of an ultrasonic instrument. Derek Moore from Siemens explains how the historical way of thinking only of capital costs needs to change to the more holistic approach of total expenditures.