Wastewater Pumps Videos

  1. KRT Wastewater Pump with Cooling Jacket 5/16/2013

    The heart of the KRT submersible waste water pump line for dry well installation is the closed jacket cooling system. Independent of the fluid handled, it ensures optimal heat dissipation in all operating conditions (wet, dry, partially flooded, or permanently submerged), just like the non-jacketed wet well model but with added cooling to compensate for the extreme ambient conditions found in most dry wells. The KRT dry well installed pump is economical, powerful and environmentally friendly. It is the ideal solution for all tasks in the municipal and industrial waste water industry.

  2. Deep Lift System for Submersible Motor Pumps 5/16/2013

    Deep lift System for KSB Submersible Motor Pumps KRT. The Deep lift station from KSB is a simple and effective solution which allows lifting and lowering of the KRT Submersible Pumps without the need for additional chain. No matter the distance, it can lift and lower the pump on a crane in one single operation. With Cable clamps at the top of the sump, it makes it easy to maneuver. The Deep Lift System is then guided by the rails and will connect to the pump lifting bail automatically even if the top of the pump cannot be seen due to the water level.

  3. Chesterton 442 Split Mechanical Seal Installation Video 8/9/2012

    The enhanced 442™ Split Seal uses installation spacers that are attached to the holder, allowing hands-free setting of the holder. The standard 442 Split Seal uses the Y-shaped spacer that must be held in place. Watch this video for an understanding of how following these quick and easy steps can make your Split Seal installation reliable.

  4. Are Your Wastewater Pump Station Operators Safe? 7/17/2012

    Smith & Loveless customer Don Gilpin tells us why he uses the S&L Wet Well Mounted Pump Station over submersible pump stations. Operator safety is an important factor.

  5. Video: Vaughan Centrifugal Chopper Pump In Action 12/15/2011

    The Vaughan Chopper Pump is a centrifugal pump with the unique ability of chopping all incoming solids prior to pumping. This not only protects the pump from clogging, but also provides added benefit to downstream components, processes, and the environment.