Wastewater Solutions

  1. Radial Jet Pod Aerators 6/18/2008
    The Mass Transfer Systems radial jet pod aerators are designed with jet aeration nozzles installed around the circumference of an integral liquid / air pod body. This configuration is most applicable for smaller round and square tanks and sequence batch reactors where directional flow patterns are not desirable.
  2. Capturing Ammonia In Flue Gas Condensate Treatment For Biomass Power Stations With 3M™ Liqui-Cel™ Membrane Contactors 8/10/2017

    Heat and power generation in biofuel engine cogeneration plants has become increasingly important as process industries look for more economical and environmentally friendly ways to produce energy.

  3. VOC Headspace 10/29/2014

    Static headspace is one of the most popular techniques due to its versatility for analyzing volatile organic compounds (VOCs) in a complex variety of matrices. This is due to the elimination of tedious sample preparation steps and prevents contamination problems that are common to other sample introduction techniques. Teledyne Tekmar draws on our experience as a leader in low-level VOC analysis with the introduction of this companion autosampler to the Headspace product line.

  4. Advanced Electronics For Zirconium Oxide Oxygen Probes 11/12/2014

    The zirconium oxide sensing technology for measuring the excess oxygen in combustion flue gases has gained prominence over the past several decades. This versatile electronics is specifically designed to run most O2 probes manufactured. The large backlit LCD display makes it easy to set up and operate. Fully automatic calibrations may be executed from this electronics with the addition of a small solenoid box for switching calibration gases.

  5. ProDSS — Handheld Multiparameter Meter 10/23/2014

    The YSI ProDSS (digital sampling system) handheld multiparameter meter provides extreme flexibility for the measurement of a variety of combinations for dissolved oxygen, turbidity, conductivity, specific conductance, salinity, resistivity, total dissolved solids (TDS), pH, ORP, pH/ORP combination, ammonium (ammonia), nitrate, chloride and temperature along with depth. 

  6. KLa Systems Total System Responsibility 3/17/2014

    A typical system consists of the Slot Injector™ aerators, jet mixers or jet aerators complete with in-basin piping system, back-flush system, liquid recirculation pumps, and air blowers.  The pumps supplied are either end suction centrifugal, submersible, or self-priming. Low pressure air is delivered by positive displacement blowers, screw compressors, multi-stage or high speed centrifugal blowers.

  7. FlexRake® Low Flow 2/1/2018

    A front-clean, front-return, mechanically-cleaned bar screen technology, Specifically designed for plants of 1 MGD or less average flow with channels 2 feet to 6 feet deep by 1 foot to 2 feet wide. Bar openings of 1/4 inch, 1/2 inch, 3/4 inch, and 1 inch are available.

  8. Fairbanks Nijhuis Services 12/18/2012

    In close co-operation with its engineering department, Pentair Fairbanks Nijhuis Services is equipped to supply complete mechanical and electrical installations on turnkey basis.

  9. TL23 Series Benchtop Turbidimeter 8/29/2016

    Trusted measurement for high range turbidity applications; simplified.
    The new TL23 Series laboratory turbidimeters blend trusted technology and improved features to simplify testing in the most demanding industrial and wastewater applications.

  10. Carbon Odor Control Systems - MCS Series 11/30/2016

    The MCS Odor Control Systems are single stage, skid-mounted, dry media systems, designed for relatively lower odor levels and organic odors. The media may be virgin activated carbon or any of a number of specialty catalytic carbon media. Standard models are available to treat up to 1,400 cfm (2400 m3/h) of odorous air.