Wastewater Measurement Products

  1. QCT Series In-Line Ultrasonic Flow Meters for Low Viscosity Liquid Applications 11/29/2019

    The compact QCT Series has no moving parts and there is nothing in the flow stream that will cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

  2. QLF Series In-Line Ultrasonic Flow Meters For Low Viscosity Low Flow Rate Applications 11/29/2019

    The QLF Series in line ultrasonic flow meter has been specifically designed for low flow rate applications that require excellent accuracy & reliability. The compact QLF Series has no moving parts, non-wetted sensors and no obstructions in the flow stream to cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

  3. EL 1100 Series Wafer Mag Meter For OEM Applications 11/26/2019

    The EL1100 series of electromagnetic flow meters represent the state of the art for the accurate measurement for OEM process applications. This new generation flow meter utilizes an innovative structure to route the electromagnetic signal generated by the electrodes, providing a flow meter with an extremely wide measurement range. With no moving parts, the EL1100J provides a compact installation with wafer connections making it a solid choice for OEMs.

  4. Complete Solutions For Wastewater Analysis 10/23/2019

    From the Primary to Quarternary treatment process, find the right ISO compliant test kits, standards & CRMs, key tools and application notes for your wastewater analysis.

  5. OpenFlows SewerOPS 10/21/2019

    Wastewater utilities face difficult operational challenges when timely decisions are needed for events associated with a range of conditions, from normal operation to sewer overflows, blockages, and network power outages. You not only need a good sense of what is happening in your network right now, but also the ability to accurately predict what is about to happen, and how to respond to achieve the best possible outcome.

  6. OpenFlows WaterOPS 10/18/2019

    OpenFlows WaterOPS is a real-time operational and optioneering decision support solution for urban water supply and distribution. Integrating live SCADA data with a calibrated hydraulic model, OpenFlows WaterOPS computes real-time conditions throughout water networks, based on existing conditions and forecasted future conditions. OpenFlows WaterOPS empowers water utilities to instantaneously gain better visibility into dark data between monitored locations, predict future performance, and react to events and emergencies.

  7. OPTISONIC 7300 Ultrasonic Flowmeter 9/16/2019

    The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F). Using the transit time differential measuring principle, the OPTISONIC 7300 delivers high performance over a wide flow range (up to DN600 / 24", turndown ratio: 100:1). Its patented titanium transducers are perfectly focused, equalizing process fluctuations and avoiding acoustic feedback.

  8. OPTISONIC 6300 Ultrasonic Clamp-On Flowmeter 9/16/2019

    The OPTISONIC 6300 is an ultrasonic clamp-on flowmeter for permanent mount installation. It is particularly suitable for flow measurement of (non-)conductive liquids at any location where inline measurement is not possible or desirable. The flowmeter consists of a combination of one or two clamp-on sensors and one ultrasonic signal converter. Its robust clamp-on rail is highly flexible and can be very easily attached to virtually any pipe up to DN4000 / 160".

  9. OPTISONIC 6300 P Ultrasonic Clamp-On Flowmeter 9/16/2019

    The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. As standard the clamp-on flowmeter is also provided with a measurement option for thermal energy applications.

  10. OPTISONIC 3400 Ultrasonic Flowmeter 9/16/2019

    The OPTISONIC 3400 is a 3-path ultrasonic inline flowmeter designed for a wide range of standard or more demanding process applications with homogeneous, non-viscous aqueous liquids as well as viscous fluids of up to over 1000 cSt. It is also the perfect choice for applications with cryogenic products (as low as -200°C / -328°F), media with extended temperature ranges (up to +250°C / +482°F) as well as low or extreme pressure ratings. The OPTISONIC 3400 offers a broad range of diameters – from DN25 / 1" for dosing purposes to DN3000 / 120" for water transportation pipelines.