Wastewater Measurement Products

  1. Complete Solutions For Wastewater Analysis
    10/23/2019

    From the Primary to Quarternary treatment process, find the right ISO compliant test kits, standards & CRMs, key tools and application notes for your wastewater analysis.

  2. OpenFlows SewerOPS
    10/21/2019

    Wastewater utilities face difficult operational challenges when timely decisions are needed for events associated with a range of conditions, from normal operation to sewer overflows, blockages, and network power outages. You not only need a good sense of what is happening in your network right now, but also the ability to accurately predict what is about to happen, and how to respond to achieve the best possible outcome.

  3. OpenFlows WaterOPS
    10/18/2019

    OpenFlows WaterOPS is a real-time operational and optioneering decision support solution for urban water supply and distribution. Integrating live SCADA data with a calibrated hydraulic model, OpenFlows WaterOPS computes real-time conditions throughout water networks, based on existing conditions and forecasted future conditions. OpenFlows WaterOPS empowers water utilities to instantaneously gain better visibility into dark data between monitored locations, predict future performance, and react to events and emergencies.

  4. OPTISONIC 7300 Ultrasonic Flowmeter
    9/16/2019

    The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F). Using the transit time differential measuring principle, the OPTISONIC 7300 delivers high performance over a wide flow range (up to DN600 / 24", turndown ratio: 100:1). Its patented titanium transducers are perfectly focused, equalizing process fluctuations and avoiding acoustic feedback.

  5. OPTISONIC 6300 Ultrasonic Clamp-On Flowmeter
    9/16/2019

    The OPTISONIC 6300 is an ultrasonic clamp-on flowmeter for permanent mount installation. It is particularly suitable for flow measurement of (non-)conductive liquids at any location where inline measurement is not possible or desirable. The flowmeter consists of a combination of one or two clamp-on sensors and one ultrasonic signal converter. Its robust clamp-on rail is highly flexible and can be very easily attached to virtually any pipe up to DN4000 / 160".

  6. OPTISONIC 6300 P Ultrasonic Clamp-On Flowmeter
    9/16/2019

    The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. As standard the clamp-on flowmeter is also provided with a measurement option for thermal energy applications.

  7. OPTISONIC 3400 Ultrasonic Flowmeter
    9/16/2019

    The OPTISONIC 3400 is a 3-path ultrasonic inline flowmeter designed for a wide range of standard or more demanding process applications with homogeneous, non-viscous aqueous liquids as well as viscous fluids of up to over 1000 cSt. It is also the perfect choice for applications with cryogenic products (as low as -200°C / -328°F), media with extended temperature ranges (up to +250°C / +482°F) as well as low or extreme pressure ratings. The OPTISONIC 3400 offers a broad range of diameters – from DN25 / 1" for dosing purposes to DN3000 / 120" for water transportation pipelines.

  8. OPTIBATCH 4011 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIBATCH  4011 is the standard Coriolis mass flowmeter for process batching of conductive and non-conductive liquids. It is a highly accurate and specialised meter for linear and rotating filling machines. The fully welded maintenance-free device with twin U-shape is particularly suitable for hygienic applications in the pharmaceutical or food and beverage industries. It can be equipped with DIN11864-2 hygienic flange connections, hygienic clamp connections or many other bespoke fittings according to customer specifications.

  9. OPTIMASS 1010 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIMASS 1010 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of universal and hygienic applications with liquids and gases (up to 170,000 kg/h or 6,235 lb/min and +130°C / +266°F). It features an integrated Modbus converter. This makes the flowmeter an ideal solution where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.

  10. OPTIMASS 3010 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIMASS 3010 is a cost-effective Coriolis mass flowmeter for low flow and dosing applications with liquids and gases (from 0.3 kg/h or 0.01 lb/min upwards). The flowmeter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.