Wastewater Disinfection Solutions

  1. TrojanUV3000B — Wastewater Disinfection System 1/18/2010

    The TrojanUV3000®B is a simple, yet robust system designed for small wastewater treatment plants that are looking to treat 1 – 5 MGD (158 – 789 m3/hr). The system is straightforward to use and requires minimal operator involvement thanks to its modular design and proven components. It can be easily retrofitted into existing chlorine contact tanks and effluent channels, and comes pre-tested, pre-assembled and pre-wired to minimize installation costs.

  2. ETS-UV™ For Wastewater Treatment 2/4/2014

    Many municipalities had adopted ultraviolet (UV) disinfection treatment over chemical based disinfection.  UV disinfection is efficient, low cost and an environmentally friendly way to disinfect water.  The process is safer for operators and the community; UV is a chemical free process that adds nothing to the water but light.  Read more about how the UV disinfection works.  Unlike chlorine, UV disinfection is able to inactivate pathogens such as Giardia and Cryptosporidium.  Discharged wastewater with these pathogens becomes dangerous drinking and recreational water for downstream communities.    

  3. The Active Control Program For Advanced UV Oxidation 12/1/2025

    This application note will explore how active control programs lower operational costs of compliant contaminant removal. 

  4. The CoMag® System for Enhanced Clarification 11/21/2014

    Proven to dramatically increase capacity performance and help to meet tightening regulations.

  5. GS1440 Sensor H2S 7/8/2024

    Water or air, measure H2S where it matters – right at the source.

  6. RapiSand™ Ballasted Flocculation System 7/23/2015

    The WesTech RapiSand™ ballasted flocculation system is a high-rate clarification process combining rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand™ sedimentation is extremely fast and can be applied in a wide variety of suspended solids removal applications.

  7. New! Fully Assembled Lightweight And Compact Complete Metering System 1/23/2025

    Looking for a Skid Mounted Complete Metering System, but your equipment room is short on space? The New CHEM-FEED CFCS is engineered for small spaces. It features a compact design and small footprint. The skid is constructed of tough, lightweight chemical and UV-resistant polyethylene, and it ships fully assembled with all necessary components for easy install and fast startup.  Wall or Shelf Mount. One or Two Pump Models.

  8. Capital Controls® Gas Feeder Series WM4000 10/12/2015

    Capital Controls Series WM4000 gas feeders are wall cabinet mounted vacuum operated and designed to conveniently house a combination of gas feed equipment. The fibreglass cabinets enclose the gas flow control components.

  9. NeoTech D428™ 4/16/2014

    The NeoTech D428™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

  10. GDT Mixing & Contacting Systems 5/19/2017

    The GDT Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor.